A temperature sensor based on modal interference in a hollow-core photonic bandgap fiber (HC-PBGF) is presented. The modal interferometer is fabricated by splicing the two ends of a 12-mm HC-PBGF to the standard single-mode fibers. The airholes in the core and cladding of the HC-PBGF are completely collapsed during the fusion splicing, and the length of the collapsed area of about 300 μm is observed. The transmission spectra under different temperatures are measured. The sensitivity of 31.8 pm/°C is achieved in the range of 25 °C-60 °C. The influence of the length of HC-PBGF on the sensitivity is also investigated.
10 December 2020 in Journal of Lightwave Technology
With the development of the volume of information exchange and perception increases, the demands for intelligent, miniaturized and integrated optical devices for information acquisition are also increasing. In the meanwhile, different from the traditional optical fibers as optical nerves, microstructured optical fibers (MOFs) give new vitality to optical functional devices due to its flexible structure and controllable optical properties. Due to the diversified air-hole structure, various functional materials can be introduced into the cladding of MOF to realize optical signal shaping, external mechanical field or biochemical sensing in different environments. Besides, various modifiable structural properties of MOF are also important in functional applications. Recently, several notable breakthroughs and progresses on promoting the modification methods have been achieved, enabling MOFs with specific functionality and engaging significant applications. In this paper, we briefly summarize different kinds of MOFs, and review the optical characterization and implementation of MOFs based on optical functional devices, crossed by our developments of the metal and twist modification studies of MOF for sensing fields. Moreover, the challenges, prospects and promising opportunities of future functional MOF for sensing applications are also presented.
A helical double cladding seven-core microstructured fiber (HSCMOF) sensor is demonstrated for inline torsion and direction measurement. To fabricate the device, a segment of SCMOF with a double cladding structure constructed by air holes is pre-twisted and spliced between two single mode fibers to form a Mach–Zehnder interferometer (MZI). Due to the special structure, the proposed sensor not only reaches the torsion sensitivities as high as 515.7 pm/(rad/m) and -294.7 pm/(rad/m) in clockwise and counterclockwise directions, respectively, but also eliminates the cross sensitivity to external temperature and refractive index interferences, which continues to be an issue that persist in normal helical fibers. We envision the sensor can be applied in harsh environments such as health monitoring and underwater exploration.
We present a novel and efficient methodology for obtaining high-gain on-chip few- mode erbium-doped waveguide amplifiers, which exhibit a moderate differential mode gain (DMG). The efficiency of the device is validated by an optimized algorithm that theoretically models the gain performance of the six lowest-order optical modes, namely TE0, TM0, TE1, TM1, TE2, and TM2. Notably, these six signal modes achieve internal net gains exceeding 22 dB within a 5-cm-long waveguide, while maintaining the DMG at a mere 2 dB. This DMG value represents a significant reduction of 5 dB compared to the non-optimized uniform doping configuration. Furthermore, a maximum saturated output power of 150 mW has been achieved. As a practical demonstration, we also propose a feasible fabrication process utilizing atomic layer deposition (ALD) along with standard complementary metal-oxide semiconductor (CMOS) techniques. These results demonstrate the superiority of our methodology in enhancing the performance of few-mode optical waveguide amplifiers.
Launch power optimization in submarine space-division multiplexing (SDM) networks is hindered by spatial–spectral coupling, nonlinear impairments, and core-dependent amplifier variations. Conventional methods struggle with scalability and accuracy in multi-core, multi-span environments. To address these limitations, we propose the first digital twin framework for submarine SDM networks, integrating a neural-network-based model to capture nonlinear spatial–spectral interactions and physical topology constraints. Two launch power profile (LPP) optimization strategies are implemented—one for spectral flattening along single lightpaths, and another for maximizing and equalizing output power across multiple lightpaths. The digital twin (DT)-based optimization method, enhanced by an iterative refinement strategy and validated on a live-operated submarine optical network with 336 space-wavelength channels, outperformed traditional DT-only approaches by reducing error by 38% and improving stability by 39% in single-lightpath configurations, while achieving an 84% improvement in stability with comparable error in multi-lightpath scenarios. Integrated with a software-defined networking (SDN) control plane, the method supports real-time, automated LPP configuration without disrupting data traffic. The demonstrated accuracy, adaptability, and scalability of the proposed approach confirm its suitability for enabling efficient planning, control, and optimization in cognitive optical networks via intelligent power management for next-generation submarine SDM systems.