30 May 2025 in Photonics Research
In this paper, an efficient Ge25Sb10S65 (GeSbS)-loaded erbium-doped lithium niobate waveguide amplifier is demonstrated. By dimensional optimization of the waveguide, an internal net gain of approximately 28 dB and a maximum on-chip output power of 8.2 dBm are demonstrated upon 1480 nm bidirectional pumping. Due to the improved optical mode field distribution within the active erbium-doped lithium niobate film and the mode overlap ratio between the pump and signal sources, a 15% high conversion efficiency can be achieved at a modest pump power of 45 mW. Furthermore, the noise figure of the amplifier can be maintained below 6 dB for low-input-signal power levels. Compared to state-of-the-art erbium-doped waveguide amplifiers (EDWAs), this heterogeneously integrated device shows superior gain performance at the desired optical C-band while avoiding the complex plasma etching process of lithium niobate, providing an inspirative solution for power compensation in the optical telecommunications.
5 February 2025 in Journal of Lightwave Technology
We propose a 19-core 5-mode-group ring-core fiber capable of supporting up to 380 spatial channels. Each core can support 5 orbital angular momentum (OAM) mode groups (MGs) with topological charge (${\mathit{l}}$) ranging from 1 to 5, all of which have a radial order of 1. In each MG, the number of degenerate modes is 4, which indicates that the scale of multiple-input multiple-output digital signal processing (MIMO-DSP) can be fixed at 4 × 4 at the receiver side. To maintain weak inter-MG coupling, our fiber design focuses on achieving a large effective index difference ($\Delta n_{eff}$) between OAM MGs and minimizing the mode field overlap. The fiber consists of 19 trench-assisted ring cores arranged in a compact cladding region, with a large core pitch to reduce inter-core crosstalk. We conduct thorough optical and communication performance evaluations on the fabricated fiber. Experimental results show that the crosstalk between adjacent lower-order MGs ($\vert {\mathit{l}} \vert$ $=$ 1, 2, 3) is below $-$ 30 dB/km, and that between higher-order MGs ($\vert {\mathit{l}} \vert$ $=$ 3, 4, 5) is below $-$ 27 dB/km. We also demonstrate the transmission capability of this fiber by multiplexing five OAM MGs across three cores over a 3.5 km span in the C band. Each channel transmits a 24-Gbaud dual-polarization quadrature phase shift keying (QPSK) signal, with signal impairments compensated using a 4 × 4 MIMO-DSP algorithm. All signals achieve a bit error rate (BER) below the 20% soft-decision forward error correction (FEC) threshold. Given its low inter-channel crosstalk and robust communication performance, this fiber holds good promise for supporting ultra-high-capacity optical transmission systems.
6 June 2024 in IEEE Photonics Technology Letters
Chromatic dispersion estimation (CDE) and timing error detection (TED) are essential components of digital signal processing for coherent optical communication systems. Despite the extensive research conducted in coherent single-mode fiber transmission systems, traditional algorithms are less efficient or ineffective when operating in few-mode fiber transmission. We develop new cyclostationary-based methods for CDE and TED, suitable for mode-division multiplexing systems employing weakly coupled orbital angular momentum fiber. The novel methods feature strong resistance to polarization mode dispersion and mode coupling. Simulations and experimental evaluations confirm the superior performance of the proposed methods.
6 March 2026 in Journal of Optical Communications and Networking
Integrated sensing and communication (ISAC) systems enable communication while concurrently endowing optical fiber with sensing capability, utilizing telecommunication networks to detect signals such as traffic. Multi-core fiber provides abundant exploitable spatial channels for ISAC systems. This work proposes a space division multiplexing distributed acoustic sensing (SDM-DAS) scheme for ISAC. By leveraging multi-component sensing signals transmitted through multiple fiber cores, SDM-DAS achieves a sensing sensitivity of 1.78p ε /Hz at 10 km under a spatial resolution of 20 m. It also demonstrates a 10 dB suppression in fading noise and a detection bandwidth three times greater than that of conventional DAS. The system employs space and wavelength division multiplexing to enable co-propagation of communication and sensing signals within individual cores of a 16.5 km field-deployed seven-core fiber, achieving real-time traffic transmission with a net capacity of 117 Tb/s. Experimental results show that the setup introduces no inter-core crosstalk and does not degrade the bit error rate of the concurrently operating communication system. Furthermore, the proposed ISAC system integrating SDM-DAS successfully detects vibration signals from vehicular traffic and metro operations in real-world field deployment.
27 February 2026 in Photonics Research
Launch power optimization in submarine space-division multiplexing (SDM) networks is hindered by spatial–spectral coupling, nonlinear impairments, and core-dependent amplifier variations. Conventional methods struggle with scalability and accuracy in multi-core, multi-span environments. To address these limitations, we propose the first digital twin framework for submarine SDM networks, integrating a neural-network-based model to capture nonlinear spatial–spectral interactions and physical topology constraints. Two launch power profile (LPP) optimization strategies are implemented—one for spectral flattening along single lightpaths, and another for maximizing and equalizing output power across multiple lightpaths. The digital twin (DT)-based optimization method, enhanced by an iterative refinement strategy and validated on a live-operated submarine optical network with 336 space-wavelength channels, outperformed traditional DT-only approaches by reducing error by 38% and improving stability by 39% in single-lightpath configurations, while achieving an 84% improvement in stability with comparable error in multi-lightpath scenarios. Integrated with a software-defined networking (SDN) control plane, the method supports real-time, automated LPP configuration without disrupting data traffic. The demonstrated accuracy, adaptability, and scalability of the proposed approach confirm its suitability for enabling efficient planning, control, and optimization in cognitive optical networks via intelligent power management for next-generation submarine SDM systems.