In this paper, a clustering algorithm based on the MaskRCNN instance segmentation network is proposed to address the radar pulse stream clustering problem. Compared with traditional algorithms, the suggested algorithm successfully avoids the problem of preset parameters and algorithm structure constraints by using instance segmentation networks as clustering algorithms, and provides an end-to-end solution for the radar signal sorting issue. A PDW lattice mapping method is proposed to adapt to the input form of the instance segmentation network. The instance segmentation network based on ResNet, FPN, RPN, and RolAlign structure detects and masks the individual from the same or different radar signals. The simulation results show that the suggested algorithm performs the sorting of radar pulse stream under the condition of serious overlapping of radar parameters.
11 December 2024 in IEEE Signal Processing Letters
Aiming at the existing deep learning radar signal modulation recognition method are mostly based on timefrequency image (TFI), resulting in a large number of network model parameters due to image contains a large amount of redundant information, this paper proposes a radar signal intrapulse modulation recognition method based on point cloud which removes redundant information. Radar signals of different modulation types are mapped into point cloud after Smoothed Pseudo Wigner-Ville Distribution (SPWVD) transformation. Then, PointNet++ is used to classify the point cloud data according to its modulation type and output its corresponding modulation type labels. Simulation results show that the proposed method can effectively recognize radar signals of typical modulation types, and show strong effectiveness and reliability at low signal-to-noise ratio (SNR). Besides, the use of a lightweight model makes the operation of the method more efficient.
8 January 2024 in IEEE Transactions on Circuits and Systems II: Express Briefs
This paper focuses on solving the overlapping problem of multicomponent signals. A single-channel radar signal separation algorithm based on visual separation with mask optimization is proposed. In this method, the reversible time-frequency transform using short-time Fourier is applied to the proposed method to complete time-frequency image pre-processing and time-domain signal reconstruction. Visual separation is achieved using an image instance segmentation network based on the Swin Transformer, FPN, RPN, and RolAlign structures. It can detect and mask individual signals using the same or different radar modulated type. The proposed model is considered a time-frequency domain visualization separation model, which is significantly different from existing deep learning models. To further address the issues of amplitude amplification and attenuation caused by visual separation, a mask optimization network based on convolution and deconvolution structures and its corresponding loss function based on global, local, and hyperlocal features is designed. Simulation experiments show that the proposed algorithm performs well and verify the feasibility of visual separation in radar signal separation.
11 September 2025 in Signal, Image and Video Processing
To facilitate the full-pulse sequence received by a radar reconnaissance receiver, this study proposed a clustering segmentation method for radar signals. Owing to the influence of the complex electromagnetic environment, the probability of the occurrence of time–frequency overlapping of signals increases, and the demand for signal localization and classification becomes higher. However, most existing studies have only classified and identified individual pulse signals and lack the ability to analyze signals for full pulses. This study proposed a multi-radar cluster-based segmentation network (MRCS-Net) for large time-length full-pulse signals. The network innovatively addresses the processing challenges of prolonged full-pulse signals and effectively achieves the classification and recognition of different pulses under time–frequency overlapping conditions. The proposed algorithm filters the signal with SincNet and then sequentially feeds the sequence into a long short-term memory network. Consequently, the outputs are clustered and segmented using multilayer perceptrons and classifiers. Experiments were conducted on six different types of radar signals. The results demonstrated that the proposed method exhibited lower segmentation error rate metric compared to other similar methods. Moreover, it outperformed other methods in terms of recognition performance.