Vadim Chashkov

Mr. Vadim Chashkov


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 May 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
MZMikhail Zarubin
Mikhail Zarubin
SKSeitbek Kuanyshbayev
Seitbek Kuanyshbayev
VCVadim Chashkov
Vadim Chashkov
ABAliya Bugubaeva
Aliya Bugubaeva
ANAlmabek Nugmanov
Almabek Nugmanov
ANAdil Nurpeisov
Adil Nurpeisov
In recent years, Kazakhstan has faced the problem of sustainable development in the field of operation of a number of reservoirs: periods of drought lead to a systematic decrease in accumulated fresh water reserves, and the flood of 2024 led to the flooding of a number of settlements. The article raises questions about the real state of the region’s reservoirs (using the example of the Karatomar reservoir), the accuracy of the conducted bathymetric studies, and the correctness of estimating the required step (or distance between the control points being taken) of the tacks (trajectory lines) of the measurement, which was carried out using the Apache 3 bathymetric drone. The study of the patterns of modeling accuracy from the frequency of tacks (trajectory lines) was carried out using kriging methods. Reservoir models were built in QGis and Surfe. When analyzing the coastline, Sentinel-2 space images and Kazvodkhoz (Kazakhstani state enterprise) data were used. The result of the study was an algorithm for determining the step of tacks (trajectory lines) for modern bottom geomorphology. The conducted research has shown that over 78 years of use, the reservoir’s parameters have undergone significant changes. A similar situation of significant deterioration in parameters is characteristic of other hydrotechnical structures in the region.

1 January 2025 in 3i: intellect, idea, innovation - интеллект, идея, инновация
Verified
Journal Article
Open access
PDF file
ANAkhmet Baitursynuly Kostanay Regional University NLC
Akhmet Baitursynuly Kostanay Regional University NLC
BSBulat Rakhimzhanovich Salykhov
Bulat Rakhimzhanovich Salykhov
VCVadim Chashkov
Vadim Chashkov
VMVladimir Anatolyevich Madin
Vladimir Anatolyevich Madin
NMNikolay Vladimirovich Manuilov
Nikolay Vladimirovich Manuilov
НМНиколай Мануйлов
Николай Мануйлов
The article presents a comprehensive analysis of technological processes in the manufacturing of parts for agricultural machinery, which significantly affect the reliability, stability, and service life of machines used in agro-industrial production. Particular attention is given to the study of requirements for the geometric parameters and physical and mechanical properties of structural materials, as these characteristics directly determine assembly precision, wear resistance, robustness, and durability of machinery components. Key parameters ensuring proper quality of parts are considered, such as tensile strength, resilient modulus, hardness, ductility, wear resistance, and corrosion resistance. Modern heat treatment methods are analyzed, including hardening, annealing, normalization, and tempering, as well as their influence on the internal structure of the metal and improvement of mechanical properties. Additionally, methods of steel alloying and chemical surface modification – such as carburizing, chromium plating, and the addition of alloying elements (manganese, boron, silicon) – are explored, as they enhance the resistance of parts to external loads and aggressive environments. A comparative analysis of different heat treatment regimens for steel grade L65 is provided using statistical methods, allowing the identification of optimal technological parameters. The study concludes that a comprehensive approach to the design and production of agricultural machinery parts – including the choice of manufacturing accuracy, treatment regimens, and material composition – can significantly increase the reliability and efficiency of machines under real operating conditions.

30 September 2025 in Ġylym ža̋ne bìlìm
Verified
Journal Article
Open access
PDF file
KBKostanay Regional University named after Akhmet Baitursynov
Kostanay Regional University named after Akhmet Baitursynov
BSB.R. Salykhov
B.R. Salykhov
SKS.B. Kuanyshbayev
S.B. Kuanyshbayev
VCVadim Chashkov
Vadim Chashkov
AYAliya Yskak
Aliya Yskak
НМНиколай Мануйлов
Николай Мануйлов
The article addresses current issues in diagnosing and correcting frame geometry deviations in tillage machinery operating under harsh field conditions. Geometry deviations in frames may result from static and dynamic loads, vibrations, or errors during manufacturing and assembly. A comprehensive analysis of the main causes of deformation is conducted, including load asymmetry, fatigue failure processes, and corrosion effects.Particular attention is given to modern methods for assessing the technical condition of frames: visual inspection using digital templates, high-precision laser scanning, and geodetic techniques involving optical instruments and satellite coordinate systems. Technological solutions for correcting identified defects are presented, such as cold mechanical straightening using hydraulic stands, thermal geometry restoration with localized heating, and reinforcement of structural nodes through the installation of additional components and welded overlays.Examples of practical frame restoration at technical service enterprises are provided, along with an evaluation of the economic efficiency of the proposed measures. It has been established that timely diagnostics and deformation correction can extend machine service life by 20–30% and reduce capital repair costs by up to 25%.The results of the study can be applied in both scheduled and unscheduled maintenance of agricultural machinery, as well as in the development of quality control standards and the design of frame structures

30 September 2025 in Ġylym ža̋ne bìlìm
Verified
Journal Article
Open access
PDF file
KBKostanay Regional University named after Akhmet Baitursynov
Kostanay Regional University named after Akhmet Baitursynov
BSB.R Salykhov
B.R Salykhov
SKS.B. Kuanyshbayev
S.B. Kuanyshbayev
VCVadim Chashkov
Vadim Chashkov
AYAliya Yskak
Aliya Yskak
NMN.V. Manuilov
N.V. Manuilov
The article presents an in-depth comparative analysis of domestic and foreign technologies for manufacturing frames for soil-cultivating machines, which play a crucial role in ensuring the strength, durability, and operational reliability of agricultural equipment. The study examines key differences in materials selection, welding methods, quality control standards, and design approaches. Particular attention is paid to the use of high-strength steel S700MC and the implementation of robotic hybrid welding (laser + MIG), which has been widely adopted in foreign enterprises and has demonstrated significant improvements in fatigue resistance. As part of the research, bench tests of 10 frames (domestic and imported) were conducted. The results revealed that foreign frames achieved up to 875 thousand cycles compared to 645 thousand for domestic samples, confirming the technological advantage of modern international practices. Additionally, an expert survey of design engineerswas carried out, highlighting the urgent need to modernize local production methods. The analysis identified major bottlenecks such as outdated welding techniques, limited automation, and insufficient application of digital design tools. Proposed directions for modernization include adopting EN ISO 3834 standards, integrating robotic welding systems, introducing high-strength steels, and updating national regulatory frameworks. The findings of this study can be applied to improve technological process charts, enhance manufacturing efficiency, and increase the competitiveness of agricultural machinery enterprises in the Republic of Kazakhstan

3 April 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
MZMikhail Zarubin
Mikhail Zarubin
SKSeitbek Kuanyshbayev
Seitbek Kuanyshbayev
VCVadim Chashkov
Vadim Chashkov
ABAliya Bugubaeva
Aliya Bugubaeva
ANAlmabek Nugmanov
Almabek Nugmanov
ANAdil Nurpeisov
Adil Nurpeisov
A single paragraph of about 200 words maximum. For research articles, abstracts should give a pertinent overview of the work. We strongly encourage authors to use the following style of structured abstracts, but without headings: (1) Background: Place the question addressed in a broad context and highlight the purpose of the study; (2) Methods: briefly describe the main methods or treatments applied; (3) Results: summarize the article’s main findings; (4) Conclusions: indicate the main conclusions or interpretations. The abstract should be an objective representation of the article and it must not contain results that are not presented and substantiated in the main text and should not exaggerate the main conclusions.