Plasticized polyvinyl chloride (PVC) gel is a mechanically compliant soft material with potential for flexible mechanoelectrical sensing. However, many PVC-gel-based sensors rely on conductive fillers, ionic additives, or specially designed conductive pathways, which increase material complexity and may introduce concerns related to filler dispersion, leakage, interfacial instability, and long-term signal drift. Here, we report a surface-structured, filler-free PVC gel sensor capable of producing self-generated mechanoelectrical signals under mechanical compression. The PVC gel was prepared by solution casting and characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, x-ray diffraction, thermogravimetric–differential scanning calorimetry, mechanical testing, dynamic mechanical analysis (DMA), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). Among the investigated surface architectures, the conical array delivered the strongest low-pressure response, with a nominal-pressure sensitivity of 110.59 Mv kPa −1 over 0.0356–0.1422 kPa, approximately 23.5-fold higher than that of the structureless control. The sensor was experimentally evaluated over 0.0356–0.7111 kPa and exhibited response and recovery times of approximately 500 and 300 ms, respectively. The enhanced response is interpreted through the combined effects of a low apparent secant modulus, amplified deformation, pressure-dependent real contact-area modulation, and interfacial charge redistribution within a proposed phenomenological electric-double-layer-like interfacial framework. A simplified geometric analysis suggests that the conical structure provides the largest normalized contact-area modulation under weak compression. The rate-dependent response, DMA, electric-modulus analysis, EIS, and CV characterize the coupled time-dependent mechanical and electrical behavior and are consistent with this mechano-interfacial interpretation. The intermittent cyclic test indicates partial signal recovery while maintaining a stable waveform. A qualitative Morse-code demonstration produced distinguishable temporal signal patterns under manually applied dot–dash inputs. This work provides a compositionally simple, filler-free strategy for enhancing the low-pressure self-generated mechanoelectrical response of PVC gels.