This study designed a handheld vibrating coffee harvester to improve the mechanized harvesting of Coffea arabica L. The proposed device was used to vibrate branches of Coffea arabica L. trees, and the shedding of coffee fruit and the operation parameters of vibrational harvesting were analyzed. Images captured using high-speed photography were used to derive a force equation that represents the forced vibration of the coffee fruit-stalk joint. In addition, the vibrations of coffee berries and branches were theoretically analyzed, and the results were used to establish a dynamic vibration model of coffee trees. The shedding of coffee berries was primarily affected by the vibration frequency, vibration amplitude, and excitation position, which were simulated using a rigid–flexible branch-machine coupling model on RecurDyn software. Furthermore, field experiments were conducted to determine the optimal working parameters for coffee harvesting using vibrations. The results indicated optimal picking performance when the vibration frequency, vibration amplitude, and excitation position were 62 Hz, 9 mm, and 0.4 L, respectively. The harvesting rates of ripe and unripe coffee were 92.22% and 8.33%, respectively, and the damage rate was 5.23%. Thus, the proposed harvester can satisfactorily achieve the optimal harvesting of Coffea arabica L.
In order to explore the optimal vibration parameters for the selective harvesting of coffee fruits, a high-velocity dynamic photography monitoring system was developed to analyze the vibration-assisted harvesting process. This system identified the optimal vibration position on coffee branches and facilitated theoretical energy transfer analysis, obtaining a mathematical formula for calculating the total kinetic energy of coffee branches. A single-factor experiment was conducted with the vibration position as the experimental factor and the total kinetic energy of coffee branches as the response variable. The results showed that the total kinetic energy of the branches was the highest at Vibration Position 2 (the position between the third and the fourth Y-shaped bud tips on the branch). Therefore, Vibration Position 2 was determined as the optimal vibration position. Further analysis established a mathematical model linking coffee cherry motion parameters to theoretical detachment force. A factorial experiment was conducted with vibration frequency and amplitude as test factors, using detachment rates of green, semi-ripe, and ripe cherries as indicators. The results showed that at 55 Hz and 10.10 mm amplitude, the detachment rate of ripe cherries was highest (83.33%), while green and semi-ripe cherries detached at 16.67% and 33.33%, respectively. A field validation experiment, with Vibration Position 2, 55 Hz frequency, 10.10 mm amplitude, and 1 s vibration duration, yielded actual detachment rates of 15.86%, 35.17%, and 89.50% for green, semi-ripe, and ripe cherries, respectively. The error margins compared with the theoretical values were all below 10%. These results confirm the feasibility of optimizing vibration harvesting parameters through high-velocity photography dynamic analysis.
To determine optimal vibration parameters for selective coffee harvesting, the vibration response and energy transfer of a coffee fruit–branch system were analyzed. A forced vibration model of the fruit–pedicel system was established to determine the critical acceleration for mature fruit detachment based on maturity-dependent connection forces. A rigid–flexible coupled dynamic model of the branch–vibrator system was developed by incorporating branch structure and mechanical properties. Single-factor simulations evaluated the effects of frequency, amplitude, and excitation position on kinetic energy transfer. The maximum kinetic energy increased from 0.162 to 0.987 J with increasing amplitude and reached 1.142 J at an excitation position of 47.98 mm. The 60–80 Hz frequency range provided high and controllable energy transfer while satisfying the critical acceleration required for ripe-fruit detachment. A test platform was then used to conduct a quadratic regression orthogonal rotational experiment, with the harvesting rates of ripe, semi-ripe, and unripe fruits as the response variables. Multi-objective optimization yielded optimal parameters of 75.75 Hz, 8.18 mm, and 109.54 mm for frequency, amplitude, and excitation position, respectively. Validation experiments conducted at 75 Hz, 8 mm, and 109 mm yielded harvesting rates of 94.62%, 8.84%, and 6.79% for ripe, semi-ripe, and unripe fruits, respectively, satisfying the predefined requirements. These results provide a theoretical basis for the design and parameter optimization of mechanized coffee harvesting equipment.