A colorimetric sensor array was developed to characterize and quantify the taste of white wines. A charge-coupled device (CCD) camera captured images of the sensor array from 23 different white wine samples, and the change in the R, G, B color components from the control were analyzed by principal component analysis. Additionally, high performance liquid chromatography (HPLC) was used to analyze the chemical components of each wine sample responsible for its taste. A two-dimensional score plot was created with 23 data points. It revealed clusters created from the same type of grape, and trends of sweetness, sourness, and astringency were mapped. An artificial neural network model was developed to predict the degree of sweetness, sourness, and astringency of the white wines. The coefficients of determination (R2) for the HPLC results and the sweetness, sourness, and astringency were 0.96, 0.95, and 0.83, respectively. This research could provide a simple and low-cost but sensitive taste prediction system, and, by helping consumer selection, will be able to have a positive effect on the wine industry.
Mandarin (Citrus reticulata L.) is consumed worldwide. Improper storage temperatures cause flavor loss and shorten shelf lives, reducing marketability. Mandarins’ quality is difficult to assess visually, as they show no apparent changes during storage. Therefore, a simple, non-destructive method is needed to assess their freshness as affected by temperature. This work utilized non-invasive bioimpedance spectroscopy (BIS) on mandarins stored at different temperatures. Eight machine learning (ML) models were trained with bioimpedance data to classify storage temperature. Also, we confirmed whether integrating diameter and time-series changes into the bioimpedance could improve the ML models’ accuracies by minimizing sample variations. Additionally, we evaluated the effectiveness of equivalent circuit (EC) parameters derived from bioimpedance data for ML training. Although slightly less accurate than using raw bioimpedance data, EC parameters can efficiently reduce data dimensionality. Among all models, the SVM model trained with changes in bioimpedance integrated with diameter data achieved the highest accuracy of 0.92. It was a significant improvement compared to the accuracy of 0.76 achieved when using only the raw bioimpedance data. Thus, this study suggests a novel method of integrating diameter and bioimpedance changes to assess the storage temperature of mandarins. This approach can also be applied to other fruits when utilizing BIS.
Astringency, a complex oral sensation resulting from interactions between mucin and polyphenols, remains difficult to quantify in portable field settings. Therefore, quantifying the aggregation through interactions can enable the classification of the astringency intensity, and assessing the capillary action driven by the surface tension offers an effective approach for this purpose. This study successfully replicates tannic acid (TA)–mucin aggregation on a paper-based microfluidic chip and utilizes machine learning (ML) to analyze the resulting capillary flow dynamics. Aggregates formed by mixing mucin with TA solutions at three concentrations showed that higher TA levels led to greater aggregation, consequently reducing the capillary flow rates. The flow dynamics were consistently recorded using a smartphone mounted within a custom 3D-printed frame equipped with a motorized sample loading system, ensuring standardized experimental conditions. Among eight trained ML models, the support vector machine (SVM) demonstrated the highest classification accuracy at 95.2% in distinguishing the astringency intensity levels. Furthermore, fitting the flow data to a theoretical capillary flow equation allowed for the extraction of a single coefficient as an input feature, which achieved comparable classification performance, validating the simplified feature extraction strategy. This method was also feasible even with only a portion of the initial data. This approach is simple and cost-effective and can potentially be developed into a portable system, making it useful for field analysis of various liquid samples.