Xuerong Zhang

Dr. Xuerong Zhang


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 March 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XZXuerong Zhang
Xuerong Zhang
ZXZhixiang Xue
Zhixiang Xue
WTWenqiong Tu
Wenqiong Tu
In this paper, an integrated wearable airbag is proposed to protect the vulnerable pedestrian during a vehicle–pedestrian collision accident. To evaluate the protection performance of this newly proposed integrated wearable airbag, the airbag inflator finite element model is first verified via an inflator tank test, and the simulated results agree very well with the test. Next, the finite element model of the vehicle–pedestrian model is established, including a simplified vehicle model and a biomechanical HBM with the integrated wearable airbag. The numerical results show the newly proposed wearable airbag can effectively protect the pedestrian by significantly reducing injuries to the head and chest. Since head injury is the most important injury type, a complete set of injury indexes is adopted to evaluate severity of head injury, including HIC15, 3 ms resultant acceleration, and intracranial pressure. To further improve the protection performance of the airbag on the HBM’s head, a parametric study is conducted towards two design parameters of the wearable airbag: inflator gas mass and pulling strap length. The parametric investigation shows 26 g gas and a 20 mm pulling strap can provide the best protection for the HBM’s head.

9 February 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XZXuerong Zhang
Xuerong Zhang
JGJing Gao
Jing Gao
WTWenqiong Tu
Wenqiong Tu
To improve the safety of middle-aged and older child occupants, this paper proposes a framework to effectively design the layout parameters of child booster seats. The layout parameters of the child booster seat include both the three-point seat belt restraint path parameters and the structural design parameters. First, based on a validated frontal collision simulation model with the sled test, a parametric study of child booster seats for different injury indices is performed based on ECE R129 regulations in terms of a Q6 child dummy. To evaluate the effects of each parameter on the overall injury for children, the modified Weighted Injury Criterion (WIC) is proposed. Then, a parameter sensitivity based on the modified WIC is conducted to screen out parameters that have a significant impact on the response of injury indices. The position of the shoulder belt guide and the stiffness of the backrest have dominant effects on the WIC. Finally, a full factorial experiment is conducted for the above selected design variables based on the newly proposed WIC. The identified design position of the shoulder belt guide is 48 mm and its value corresponds to 30 mm of the relevant headrest position, which is explicitly utilized in the design process. The identified stiffness of the backrest is 30,400 Nm/rad. The corresponding WIC is decreased significantly, and the value is reduced by 19.6% compared with the reference model.

8 March 2021 in International Journal of Crashworthiness
Verified
Journal Article
Closed access
XZXuerong Zhang
Xuerong Zhang
YNYanxiao Niu
Yanxiao Niu
In order to explore the influence of the general layout parameters of the child restraint system on the evaluation index of child injury in a frontal impact, and to explore the general layout plan that can minimize the child’s injury, this paper selects an I-Size child safety seat that meets the ECE R44 regulations as the research object, in accordance with the ECE R129 regulations, uses the Q3 child dummy to perform a frontal impact sled test on it, and record the test results. On this basis, a simulation concept model of the child safety seat is established, and the parameter combination of the seat back angle and cushion angle and the parameters of the five-point seat belt exit position are studied, and the overall layout design scheme with the best child protection performance is obtained.

25 August 2021 in International Journal of Crashworthiness
Verified
Journal Article
Closed access
XZXuerong Zhang
Xuerong Zhang
XXXing Xinmei
Xing Xinmei
In this paper, a side impact simulation model is established based on ECE R129 regulations. The four design parameters of headrest stiffness, head cushion foam density, the gap between headrest and dummy head, and seat wing shell stiffness are taken as objects to study their effects on side impact protection of children's safety seats, respectively. And through orthogonal test and variance analysis, the gap between headrest and dummy head and seat wing shell stiffness are selected as optimization parameters. Then, the response surface model of damage index aH and HPC15 is established, and the optimal value is solved by multi-objective optimization method based on NSGA-II algorithm. In order to further improve the side impact protection capability of child safety seat, a side impact model of child safety seat with SIP is built. The influence of structural stiffness, length and installation position of SIP on the side protection performance of child safety seat is studied. Then the optimal design scheme of SIP is obtained by experimental design and comprehensive comparison. It is concluded by above analysis of research that: extending the contact time between the occupant's head and the side wing of the child safety seat can effectively reduce the Y-direction speed of the occupant's head during contact, thus effectively reducing the head injury of children in side impact.

6 June 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WTWenqiong Tu
Wenqiong Tu
ZPZhang Peiwen
Zhang Peiwen
JZJing Zhang
Jing Zhang
YLYang Liu
Yang Liu
XYXin Ye
Xin Ye
XZXuerong Zhang
Xuerong Zhang
This study investigates occupant kinematic and injury responses in zero-gravity seats under rear impacts at 16 km/h, 40 km/h, and 56 km/h and evaluates the protective performance of a conventional three-point seat belt system and a four-point seat belt system. First, a THUMS (Total Human Model for Safety)-based finite element assembly consisting of a regular seat model and a conventional three-point seat belt system was verified by comparing the kinematic responses and time-history curves of head acceleration, head rotation, and the T1 acceleration of PMHS (Postmortem Human Subject) tests. Then, a THUMS-based finite element assembly in a zero-gravity seat with a three-point seat belt system was created, and computational biomechanical analyses revealed that at low-to-medium impact speeds (16 and 40 km/h), the occupant exhibited backward sliding in the zero-gravity seat along the seatback with lower limb rotation and did not experience head and neck injury. However, a 56 km/h impact induced an excessive seatback rotation and caused the head to become out of position. The neck collided with the upper part of the headrest and caused a surge in the contact force between the neck and the headrest. The head injury and neck injury were comprehensively analyzed via the head injury metrics and neck injury metrics, including cervical spine injury metrics and cervical ligament injury metrics. Further, a four-point seat belt system was adopted and demonstrated better and more balanced restraining effects by reducing the relative displacement between the occupant’s head and chest in the x- and y-directions by 26% and 84%, respectively. Therefore, the occupant’s head remains in position and the collision between the neck and the headrest can be avoided. Maximum reductions in the head and neck injury metrics reached 70% and 57%, respectively. The current study illustrates the disadvantages of the traditional three-point seat belt system in restraining the occupant in a zero-gravity seat under rear impact and shows the four-point seat belt to be a better alternative. This study sheds light on seat belt system design and optimization towards future zero-gravity seats under rear impact.

24 August 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WTWenqiong Tu
Wenqiong Tu
TGTianhao Ge
Tianhao Ge
WPWenjie Peng
Wenjie Peng
YLYang Liu
Yang Liu
XZXuerong Zhang
Xuerong Zhang
Under high-speed frontal impact, occupants in zero-gravity seats restrained by a three-point seatbelt are at risk of head injury, lumbar spine injury, and submarining. To reduce occupant injury, this study systematically investigated the protective effects of active seatback repositioning strategies on occupants under 56 km/h frontal impact. First, the THUMS (Total Human Model for Safety)-based finite element assembly consisting of a regular seat model and a 3-point seat belt system was verified by comparing thoracic acceleration, head acceleration, lap belt force, and shoulder belt force with PMHS test data. On this basis, a zero-gravity seat model with an active seatback repositioning function was established. Using this model, the effects of seatback repositioning timing and seatback rotational speed on occupant kinematic responses and injury protection performance were investigated. The results showed that with the introduction of active seatback repositioning before the crash, occupant head and lumbar spine injuries, as well as submarining tendency, can be significantly reduced. Particularly, with respect to the repositioning time analysis, the seatback repositioning with 100 ms precrash setting provided the best protective performance and compared with the fixed-seatback condition, the occupant head injuries of HIC15, BrIC, CSDM(0.25), injury probability of lumbar spine and pelvic forward excursion was reduced by 66.4%, 65%, 99.8%, 34.1%, and 48%, respectively. Furthermore, the influence of seatback repositioning speed on occupant injury protection was examined. The results indicated that an excessively high seatback rotational speed increased head and neck injury, thoracolumbar flexion, as well as risk of rib injury.