The potential use of dried anaerobic granular sludge (DAGS) as a substitute for granular activated carbon (GAC) for removing phenol and lead from aqueous solution was examined in a batch system. To make the comparison between adsorption/biosorption process fair, the working sorption pH, temperature, mixing speed and contact time were fixed at 4, 30°C, 250 rpm and 24 h, respectively for both the sorbents. Adsorption/biosorption isotherms were developed for both the single and binary component systems and expressed by four models. Model parameters were estimated by the nonlinear regression method using STATISTICA version 6 and EXCEL 2007 software. The maximum loading capacity (qm) of the phenol was 66.8234 and 37.0370 mg/g for lead onto GAC, while it was 70.0183 mg/g for phenol and 89.8783 mg/g for lead onto DAGS in single system. However, in binary system, the loading capacity decreased because of competition between compounds to binding sites of adsorbent/biosorbent.
1 August 2019 in Journal of Water Process Engineering
The comparison between the living and dead microorganisms for removing phenol and lead from aqueous solution was examined in a batch system. The working sorption pH, temperature, mixing speed and contact time were fixed at 4, 30°C, 250 rpm and 24 h respectively. Biosorption isotherms were developed for both the single and binary component systems and expressed by four models. Model parameters were estimated by the non-linear regression method using STATISTICA version-6 and EXCEEL-2007 software. The maximum loading capacity (qm) of the phenol was 30.2018 and 70.0183 mg g−1 and for lead was 36.7888 and 89.8783 mg g−1 onto live and dead microorganisms in single system respectively. However, in binay system the loading capacity decreased because of competition between compounds to binding sites of biosorbents. Desorption efficiency from living microorganisms was 85.974% and 80.096% under 0.1 M of Na2CO3 and HCl, while it was 95.352% and 96.632% from dead microorganisms for phenol and lead respectively.
5 April 2019 in International Journal of Environmental Science and Technology