The pull-back method for determining dynamic tensile strength assumes one-dimensional stress wave propagation and material homogeneity. This study validates these assumptions for unidirectional reinforced concrete (UDRC) through experiments and numerical simulations. Split Hopkinson pressure bar tests were conducted on plain concrete, plain UDRC, and deformed UDRC specimens containing a central 6 mm steel bar. Ultra-high-speed digital image correlation at 500,000 fps enabled precise local strain rate measurements (3 s−1 to 55 s−1) at fracture locations. Finite element simulations revealed that while reinforcement induces localized multi-axial stresses near the steel–concrete interface, the bulk concrete maintains predominantly uniaxial stress conditions. Experimental results showed less than 1% variation in pull-back velocity between specimen types. Statistical analysis confirmed a unified strain rate-strength relationship: , independent of reinforcement configuration (ANCOVA: for interaction term). The dynamic tensile strength is governed by concrete matrix properties rather than reinforcement type. These findings are the first to experimentally and numerically validate the pull-back method’s applicability to UDRC systems, establishing that dynamic tensile failure is matrix-dominated and enabling simplified one-dimensional analysis for reinforced concrete under impact.
Intergranular corrosion (IGC) and exfoliation corrosion (EXCO) limit the durability of 2219 Al–Cu in chloride-rich, cyclic-humidity aerospace environments, and conventional thermal stress relief can worsen grain boundary precipitates and grain boundary non-precipitation zones (PFZs), motivating evaluation of low-temperature resonant vibration stress relief. Using polarization tests and microstructural analysis, we show that RRV lowers corrosion current, strengthens passivation, and reduces IGC and EXCO susceptibility. Alternating tensile–compressive stresses build dislocation networks that convert continuous or semi-continuous grain boundary precipitates into discrete distributions, increasing corrosion path tortuosity and slowing intergranular attack. A more discrete cathodic phase, a narrowed solute-enriched anodic band, and reduced PFZs disrupt corrosion channel continuity, weaken microgalvanic driving forces via a more uniform θ′ distribution, and limit corrosion product wedging, while homogenized precipitates suppress local galvanic coupling in EXCO-like media. Overall, RRV synergistically optimizes dislocation configuration and precipitate redistribution to intrinsically enhance corrosion resistance and offers a practical, low-temperature, scalable route to improve the durability of high-strength aluminum alloy structures in aerospace service.