This paper investigates the impact of sintering temperature on oxygen vacancy concentration and its subsequent effect on the microstructure and electrical properties of (BIT) ceramics. To further clarify these effects, VASP software was employed to simulate BIT ceramics with varying oxygen vacancy concentrations.The experimental results demonstrate that sintering temperature significantly influences the oxygen vacancy concentration. At the optimal sintering temperature of 1080 °C, the BIT ceramics exhibit a balanced microstructure with a grain size of 4.16 μm, the lowest measured oxygen vacancy concentration of 18.44%, and a piezoelectric coefficient () of 9.8 pC/N. Additionally, the dielectric loss () remains below 0.2 at 500 °C, indicating excellent thermal stability. VASP-based simulations reveal that increasing the oxygen vacancy concentration from 18.56% to 44.55% results in a significant collapse of the band gap (from 2.8 eV → 1.0 eV) and a transition in conductivity type from p-type to n-type. This shift induces a leakage current-dominated threshold effect, leading to a decrease in piezoelectric properties ( reduced from 9.8 to 6.9 pC/N). Atomic-scale density of states (DOS) analyses indicate that the delocalization of and the weakening of Bi–O hybridization collectively induce lattice distortion and ferroelectric inconsistency. These changes are correlated with an increase in dielectric loss and a slight reduction in Curie temperature (from 620 °C → 618 °C). In conclusion, this study comprehensively elucidates the influence of oxygen vacancy concentration on the microstructure and electrical properties of BIT ceramics. The findings provide a theoretical foundation and practical insights for designing high-performance piezoelectric ceramics.
A Pd-decorated V2O5/porous silicon (Pd-V2O5/PSi) composite was synthesized via magnetron sputtering for enhanced NO2 gas sensing. The material’s morphology and composition were systematically characterized, and its gas sensing performance was evaluated through comprehensive experimental measurements and first-principles calculations. The decoration of Pd nanoparticles significantly improved the sensing capabilities of the V2O5/PSi composite, particularly enhancing sensitivity and response/recovery characteristics. Experimental results revealed a 3.1-fold increase in response to specific NO2 concentrations (ppm level) compared to the undecorated V2O5/PSi sensor. The composite exhibited rapid NO2 response at room temperature with excellent selectivity, reproducibility, and long-term stability. First-principles calculations elucidated the structural, electronic, and adsorption properties of the Pd-V2O5/PSi composite, uncovering the gas sensing mechanism in NO2 environments. This combined experimental and theoretical study provides valuable insights for developing advanced gas sensors and lays a foundation for optimizing metal oxide-based sensing materials.
1 January 2025 in Processing and Application of Ceramics
High-temperature lead-free Bi4-xCexTi2.95W0.05O12 (where x = 0, 0.02, 0.04, 0.06) piezoelectric ceramics were prepared by conventional solid-state method and sintering at 1080?C. This study investigated the effects of modulating the degree of ceramic lattice distortion by varying the amount of Ce4+ doping on the microscopic morphology as well as the piezoelectric and dielectric properties. The results indicated that an appropriate level of Ce4+ doping resulted in a suitable degree of lattice distortion within the piezoelectric ceramics, thereby enhancing both the piezoelectric and dielectric properties while reducing dielectric losses. Notably, when the doping level reached x = 0.04, the sample exhibited its optimal performance, specifically with a d33 of 25 Pc/N, TC of 618?C, tan ? of 0.09 and Qm of 3364. These findings strongly suggest that this material has significant potential for applications in high-level sensing domain.
1 April 2026 in Journal of Physics: Conference Series
Conventional large-scale numerical simulations of Czochralski (C z ) silicon crystal growth are significantly constrained by the high computational costs of the Finite Element Method (FEM), making it challenging to meet the demands of real-time process optimization and multi-parameter space exploration. To overcome this challenge, a hybrid modeling method combining COMSOL Multiphysics simulation and Physical Information Neural Network (PINN) is proposed. By embedding the Magnetohydrodynamics (MHD) equations as physical constraints into the neural network’s loss function, a parametric adaptive surrogate model is constructed, taking spatial coordinates and magnetic induction intensity(B) as characteristic inputs. Guided by a sparse set of high-fidelity simulation data, the PINN achieves a mapping of physical fields from discrete simulation points to a continuous parameter space. After successful training, the model is capable of quickly and accurately predicting the thermal and flow fields under a given magnetic field strength. Results demonstrate that the proposed framework improves process optimization efficiency by several orders of magnitude while maintaining strict physical consistency, providing an efficient computational scheme for the “digital twin” of semiconductor manufacturing.
This paper focuses on the switching and modulation techniques of terahertz waves, develops thin-film materials with an SPP structure, and uses terahertz time-domain spectroscopy (THz-TDS) to study the semiconductor–metal phase transition characteristics of thin films, especially the photoinduced semiconductor–metal phase transition characteristics of silicon-based thin films. The optical modulation characteristics of silicon-based thin films to terahertz waves under different light excitation modes, such as continuous light irradiation at different wavelengths and femtosecond pulsed laser irradiation, were analyzed. Combining the optical modulation characteristics of silicon-based thin films with the filtering characteristics of SPP structures, composite structures of thin films with metal hole arrays, composite structures of thin films with metal block arrays, and silicon-based microstructure arrays were designed. The characteristics of this dual-function device were tested experimentally. The experiment proves that the film material with an SPP structure has a transmission rate dropping sharply from 32% to 1% under light excitation; the resistivity changes by more than six orders of magnitude, and the modulation effect is remarkable. By applying the SPP structure to the material, the material can simultaneously possess modulation and filtering functions, enhancing its optical performance in the terahertz band.