Coating the perovskite layer via a two-step method is an adaptable solution for industries compared to the anti-solvent process. But what about the impact of unreacted PbI2? Usually, it is generated during perovskite conversion in a two-step method and considered beneficial within the grain boundaries, while also being accused of enhancing the interface defects and nonradiative recombination. Several additives are mixed in PbI2 precursors for the purpose of improving the perovskite crystallinity and hindering the Pb2+ defects. Herein, in lieu of adding additives to the PbI2, the effects of the PbI2 residue via the electron transport layer/perovskite interface modification are explored. Consequently, by introducing artemisinin decorated with hydrophobic alkyl units and a ketone group, it reduces the residual PbI2 and improves the perovskites’ crystallinity by coordinating with Pb2+. In addition, artemisinin-deposited perovskite enhances both the stability and efficiency of perovskite solar cells by suppressing nonradiative recombination
Despite the rapid efficiency advancement of perovskite solar cells (PSCs), non-radiative recombination at the buried interface between self-assembled monolayers (SAMs) and perovskite remains a critical bottleneck, primarily due to interfacial defects and energy level mismatch. In this study, we demonstrate a bifunctional interlayer engineering strategy by introducing 4,5-diiodoimidazole (4,5-Di-I) at the Me-4PACz/perovskite interface. This approach uniquely addresses two fundamental limitations of SAM-based interfaces: the insufficient defect passivation capability of conventional Me-4PACz due to steric hindrance effects and the poor perovskite wettability on hydrophobic SAM surfaces that exacerbates interfacial voids. The imidazole derivatives not only form strong Pb–N coordination bonds with undercoordinated Pb2+ but also modulate the surface energy of Me-4PACz, enabling the growth of pinhole-free perovskite films with preferential crystal orientation. The champion device with 4,5-Di-I modification achieves a power conversion efficiency (PCE) of 24.10%, with a VOC enhancement from 1.12 V to 1.14 V, while maintaining 91% of initial PCE after 1300 h in N₂ atmosphere (25 °C), demonstrating superior stability under ISOS-L-2 protocols. This work establishes a universal strategy for interfacial multifunctionality design, proving that simultaneous defect suppression and crystallization control can break the long-standing trade-off between efficiency and stability in solution-processed photovoltaics.
Addressing the critical challenges of interfacial defects and insufficient stability in perovskite solar cells, this work introduces a co-solvent engineering strategy to dynamically regulate the phenethylammonium chloride (PEACl) passivation layer. The effect of isopropyl alcohol (IPA) and a DMSO: IPA (1:100) mixture as solvent for forming the PEACl 2D passivation layer is systematically explored, and the synergistic interplay between solvent coordination strength and crystallization kinetics is systematically investigated. The DMSO: IPA (1:100) blend balances Pb-O coordination (via DMSO) and rapid phase separation (via IPA), enabling the oriented growth of a dense, ultrathin 2D perovskite overlayer. This suppresses defect density (electron traps reduced to 1.68 × 1015 cm−3) and extends carrier lifetime, yielding a champion power conversion efficiency (PCE) of 24.27%—a significant improvement over the control (22.73%). For the first time, we establish a dual-parameter “solvent coordination-crystallization kinetics” model, providing a universal framework for designing environmentally benign solvent systems and advancing the industrial scalability of high-performance perovskite solar cells (PSCs).