AYHAN EROL

Dr. AYHAN EROL


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in Open Chemistry
Verified
Journal Article
Open access
PDF file
AEAyhan Erol
Ayhan Erol
VBVildan Özkan Bilici
Vildan Özkan Bilici
AEAYHAN EROL
AYHAN EROL
The scope of this study, that is, the effect of the elastic modulus obtained by ultrasonic method on the physical and mechanical properties of tungsten carbide (WC)-based ceramic–metal composites, which have Ni and Co metallic binder composition produced by powder metallurgy and represented by high strength and hardness criteria, was investigated. In order to obtain composite samples in the study, it was sintered in a microwave furnace at different temperatures to combine the powder particles prepared at the rate of 60% Ni, 20% Co, and 20% WC by weight. Then, the velocities and longitudinal attenuation values of longitudinal and shear ultrasonic waves along the composite sample were measured using the ultrasonic pulse-echo method. The elastic modulus of the composites was determined using ultrasonic velocities and sample density. Hardness testing, scanning electron microscopy (SEM), and X-ray diffraction (XRD) analyses were also performed. The results show that the elastic modulus increases with the increase in sintering temperature and ultrasonic wave speeds, but decreases with the longitudinal attenuation value, considering the SEM images and XRD analysis. There is also a linear relationship between elastic modulus and stiffness.

1 July 2021 in Protection of Metals and Physical Chemistry of Surfaces
Verified
Journal Article
Closed access
PDF file
YKYusuf Kayali
Yusuf Kayali
AEAYHAN EROL
AYHAN EROL
Powder metallurgy (P/M) technology, which is a method of mixing, pressing and sintering stages, has many advantages (complex designs, low cost) as well as disadvantages (porosity, low surface hardness). Nowadays, surface coating methods are preferred to eliminate the disadvantage of powder metallurgy methods. In this study, samples of 96.4Fe–Mn, 89.25Fe–7.24Cr–Mn, 82.12Fe–14.39Cr–Mn, 75.08Fe–21.45Cr–Mn and 68.13Fe–28.42Cr–Mn were produced in volumetrically varying compositions. In order to increase the lifetime of ceramic-metal composites produced by the powder metallurgy method, pack boriding process was applied in 950°C for 4 h. The morphology of the boride layers formed on the surfaces of the produced samples was examined with SEM microscope. Hardness values of uncoated samples ranged from 47.5 to 240.6 HV0.05 according to their composition, and hardness values of borided samples increased from 1641 to 1950 HV0.05. Wear tests were carried out using a ball-disc wear method at a slip speed of 0.3 m/s under a load of 5 N under a load of 250 m in dry environment. Adhesion properties of the boride layer were examined by the Daimler-Benz Rockwell-C indentation test. With the boriding process, the friction coefficient has decreased and the low wear resistance has increased.

24 January 2015 in Transactions of the Indian Institute of Metals
Verified
Journal Article
Closed access
PDF file
AEAYHAN EROL
AYHAN EROL

1 September 2022 in Russian Journal of Nondestructive Testing
Verified
Journal Article
Closed access
PDF file
AEAYHAN EROL
AYHAN EROL
VBVildan Özkan Bilici
Vildan Özkan Bilici
In this study, composite samples were produced using Ni, Co, and WC powders at different sintering temperatures by pack boronizing and powder metallurgy method. Prepared composites were boronized in commercial Ekabor®-2 powder between 1000 and 1400°C for 2 and 6 h using the pack boronizing method. Using the powder metallurgy method, all powders were sintered in the tube furnace under argon shroud at the same temperature range. Ultrasonic velocity, ultrasonic attenuation and Young’s modulus values were determined by using the pulse-echo method, which is one of the non-destructive testing methods. Transverse and longitudinal ultrasonic velocities and density were used to calculate the Young’s modulus of these samples. Ultrasonic properties such as ultrasonic velocity, ultrasonic attenuation and Young’s modulus and mechanical properties such as microhardness and density showed a linear relationship with the sintering temperature. SEM (scanning electron microscopy), EDX (energy dispersive X-ray spectroscopy) analysis was performed to characterize the properties of Ni–Co–WC ceramic composite samples. The relative effects of the surface images and microstructural changes of the samples prepared at different temperatures and different methods on the ultrasonic attenuation and velocity were investigated in Ni–Co–WC composite samples. As the sintering temperature increased, microhardness and density values of the composite samples also increased. The X-ray analyzes showed that the phases in the produced composites were successfully made in both methods. In addition, the experimental results of the composites obtained by the pack boronizing method increased linearly as the sintering temperature increased compared to the powder metallurgy method. The surface hardness of the material obtained in the boriding process increased approximately 4.5 times.

15 December 2021 in Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi
Verified
Journal Article
Closed access
PDF file
MKMuhammed Mustafa Kelek
Muhammed Mustafa Kelek
ECEnes Cengiz
Enes Cengiz
YOYüksel Oğuz
Yüksel Oğuz
AEAYHAN EROL
AYHAN EROL
Göğüs kanseri dünya genelinde kadınlarda en çok karşılaşılan kanser türüdür. Günümüzde her kadının başına gelebilecek olan göğüs kanseri, erkeklerde de görülebilmektedir. Göğüs kanserinde insanların fiziksel ve zihinsel halleri çok etkilidir. Göğüs kanserine karşın tedbirli olabilmek için belirli aralıklarla göğüs dokularının incelenmesi gerekmektedir. Bu dokular, uzmanlar tarafından incelenmektedir. Ancak inceleme esnasında yapılan yanlış teşhisler tedavi sürecini olumsuz etkilemektedir. Bu sebeple, bu dokuların sayısal ortamda işlenip incelenmesi daha faydalı olmaktadır. Bu çalışmada, YSA ile göğüs kanserinin sınıflandırması yapılmıştır. Mamografi görüntüleri üzerinde Döndürülmüş Yerel İkili Örüntü (RLBP) metodu kullanılarak öznitelikler çıkarılmıştır. Bu öznitelikler, parametreleri belirlenmiş olan YSA aracılığı ile eğitilmiştir. Eğitim sonucunda iyi ve kötü huylu olarak sınıflandırılan ikili sınıflandırmada %87,82 ve Yağlı, Yağlı-Glandüler ve Yoğun-Glandüler olarak sınıflandırılan üçlü arka plan doku sınıflandırmasında %80,95 başarı oranı elde edilmiştir.

1 September 2011 in Science and Engineering of Composite Materials
Verified
Journal Article
Open access
PDF file
AEAYHAN EROL
AYHAN EROL
AEAyhan Erol
Ayhan Erol
Ni-Fe metal matrix composites reinforced with TiC have been fabricated by tube furnace sintering at various temperatures. A uniform nickel layer on TiC and Fe powders was deposited using electroless plating technique prior to sintering, allowing closer surface contact than can be achieved using conventional methods, such as mechanical alloying. The reactivity between TiC and Fe powders, to form carbides of Fe, is controlled through Ni layer existing on the starting powders. A composite consisting of quaternary additions, a ceramic phase, TiC, within a matrix of FeNi, has been prepared at the temperature range 1000–1400°C under argon shroud. X-ray diffraction, scanning electron microscope (SEM), compressive testing and hardness measurements were employed to characterize the properties of the specimens. Experimental results carried out at 1200°C suggest that the best properties, such as maximum compression strength (σ max ) and hardness (HB), were obtained at 1200°C and the tube sintering of electroless Ni plated TiC and Fe powders, is a promising technique to produce ceramic reinforced Ni-Fe composites.