The intake channel of circulating water pump house is an important part of water supply system in thermal power plant. The good hydraulic performance of intake channel is very important for operation efficiency of water pump and ensuring the safety of power plant. A hydraulic model of scale 1:12 is used to study the hydraulic characteristics of circulating pump house with an ultra-short forebay in this paper, the reasons for the formation of undesirable flow patterns, such as flow bias at the inlet, rotating filter outlet of the flow channel and backflow the circulation of the pipe at the bottom of the flapper, and the appearance of the suction vortex in the suction chamber, are analyzed, a rectifying facility consisting of "column + beam" is proposed to be installed in the forebay, a curved bias pier is added at the outlet of the traveling network, and a breast wall is suggested to be set in the suction chamber. With undesirable flow patterns in the original scheme are eliminated, the uniformity of the flow velocity distribution in the flow channel is improved, the flow pattern is relatively stable and smooth, and the ideal inflow condition of the suction mouth is guaranteed. The research results can provide a reference for the design and hydraulic performance optimization of the pump house of similar thermal power plant.
The primary cause of the scale effect in scaled models for flood discharge and energy dissipation lies in the dissimilarity of the air dispersion patterns of the ski-jump nappe. To uncover the scale-effect relationship governing the air dispersion patterns of ski-jump energy dissipation nappes in high dams, a series of scaled physical model tests were conducted at the Baihetan Hydropower Station. The air dispersion patterns were systematically observed, as well as the distribution characteristics of entrained air concentration in the ski-jump nappe across various scales. Based on the experimental observations, a two-dimensional stochastic diffusion numerical model was developed, successfully replicating the dispersion process of the nappe as it gradually transformed from a crescent shape to a circular one. Furthermore, by calibrating the concentration distribution curve, a quantitative relationship was established between the random displacement parameter σ and the Weber number. The study revealed that when the Weber number (We) is below 40,000, σ increases rapidly and approximately linearly with We, indicating a high sensitivity to dispersion degree. However, once We surpasses 40,000, the growth rate significantly decelerates, approaching saturation, suggesting that the dispersion degree closely approximates the prototype condition. Consequently, it is suggested that the Weber number control threshold for the physical model of ski-jump water–air two-phase flow in high dams be set above 40,000, providing a valuable reference for selecting large-scale models.
1 March 2020 in IOP Conference Series: Materials Science and Engineering
The annular shaft, which is widely used in tailings and some large and medium water conservancy project, has the characteristics of simple structure and strong discharge capacity. With the increase of working head, the energy dissipation problem of shaft is becoming much important. Model test results shows that the peak of the hydrodynamic pressure at the bottom of the shaft happens when the water jet merge together, for the water depth H in the shaft is low then, the pre-excavated hydrostatic depth is the main factor of energy dissipation. The fitting formula of the maximum impact pressure is obtained and it is suggested that the energy dissipation depth h should be 0.8D.