The injection of sulfonated-modified water could be an attractive application as it results in the formation of a mechanically rigid oil-water interface, and hence, possible higher oil recovery in combination with polymer. Therefore, detailed experimental investigation and fluid-flow analysis into porous media are required to understand the possible recovery mechanisms taking place. This paper evaluates the potential influence of low-salt/sulfate-modified water injection in oil recovery using a cross-analyzed approach of coupled microfluidics data and core flooding experiments. Fluid characterization was achieved by detailed rheological characterization focusing on steady shear and in-situ viscosity. Moreover, single and two-phase micromodels and core floods experiments helped to define the behavior of different fluids. Overall, coupling microfluidics, with core flooding experiments, confirmed that fluid-fluid interfacial interaction and wettability alteration are both the key recovery mechanisms for modified-water/low-salt. Finally, a combination of sulfate-modified/low-salinity water, with polymer flood can lead to ~6% extra oil, compared to the combination of polymer flood with synthetic seawater (SSW). The results present an excellent way to make use of micromodels and core experiments as a supporting tool for EOR processes evaluations, assessing fluid-fluid and rock-fluid interactions.

With their high storage capacity and energy efficiency as well as the compatibilities with renewable energy sources, high‐temperature aquifer thermal energy storage (HT‐ATES) systems are frequently the target today in the design of temporally and spatially balanced and continuous energy supply systems. The inherent density‐driven buoyancy flow is of greater importance with HT‐ATES, which may lead to a lower thermal recovery efficiency than conventional low‐temperature ATES. In this study, the governing equations for HT‐ATES considering buoyancy flow are nondimensionalized, and four key dimensionless parameters regarding thermal recovery efficiency are determined. Then, using numerical simulations, recovery efficiency for a sweep of the key dimensionless parameters for multiple cycles and storage volumes is examined. Ranges of the key dimensionless parameters for the three displacement regimes, that is, a buoyancy‐dominated regime, a conduction‐dominated regime, and a transition regime, are identified. In the buoyancy‐dominated regime, recovery efficiency is mainly correlated to the ratio between the Rayleigh number and the Peclet number. In the conduction‐dominated regime, recovery efficiency is mainly correlated to the product of a material‐related parameter and the Peclet number. Multivariable regression functions are provided to estimate recovery efficiency using the dimensionless parameters. The recovery efficiency estimated by the regression function shows good agreement with the simulation results. Additionally, well screen designs for optimizing recovery efficiency at various degrees of intensity of buoyancy flow are investigated. The findings of this study can be used for a quick assessment and characterization of the potential HT‐ATES systems based on the geological and operational parameters.