The paper presents a new approach to fuzzy Petri net (FPN) and its hardware implementation. The authors' motivation is as follows. Complex industrial processes can be often decomposed into many parallelly working subprocesses, which can, in turn, be modeled using Petri nets. If all the process variables (or events) are assumed to be two-valued signals, then it is possible to obtain a hardware or software control device, which works according to the algorithm described by conventional Petri net. However, the values of real signals are contained in some bounded interval and can be interpreted as events which are not only true or false, but rather true in some degree from the interval [0, 1]. Such a natural interpretation from multivalued logic (fuzzy logic) point of view, concerns sensor outputs, control signals, time expiration, etc. It leads to the idea of FPN as a controller, which one can rather simply obtain, and which would be able to process both analog, and binary signals. In the paper both graphical, and algebraic representations of the proposed FPN are given. The conditions under which transitions can be fired are described. The algebraic description of the net and a theorem which enables computation of new marking in the net, based on current marking, are formulated. Hardware implementation of the FPN, which uses fuzzy JK flip-flops and fuzzy gates, are proposed. An example illustrating usefulness of the proposed FPN for control algorithm description and its synthesis as a controller device for the concrete production process are presented.
12 September 2012 in IEEE Transactions on Systems, Man, and Cybernetics: Systems
Fuzzy Petri nets (PNs) discussed in the literature are usually considered as expert systems involving fuzzy-based reasoning. They are used as decision support or monitoring systems. There were only few ideas of using fuzzy PNs directly as controllers. This paper defines fuzzy interpreted PN, which can be a formal representation of a concurrent control algorithm. Hardware implementation of the net, which uses fuzzy RS flip-flops and fuzzy gates, is proposed. The usefulness of the net for control algorithm description is exemplified by a hot forging process.
1 January 1998 in IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics)
This paper presents a concept of new fuzzy J-K flip-flops based on bounded product, bounded sum and fuzzy complementation operations. Relationships between various types of the J-K flip-flops are given and characteristics of them are graphically shown by computer simulation. Two examples of circuits able to memorize and fuzzy information processing using the proposed fuzzy J-K flip-flops are presented.
The main goal of this work is to design a supervising controller able to detect an anomaly in the milling process and implement the soultion in Field Programmable Gate Array (FPGA) chip. Executing this task, the controller continuously monitors the vibration signal coming from the acceleration sensor, installed on the milling machine, and striving to isolate new vibration patterns which are different from typical patterns recorded for the correct milling process. The detection method relies on determining selected signal features in the frequency domain and applying an auto-associative neural network (AANN) for novelty detection. It has been shown that by exercising the frequency spectrum of the vibration signal, extracting specific features of the signal’s spectrum, and using an auto-associative neural network, it is possible to detect anomalies in a milling process with relatively high efficiency. The accuracy, sensitivity, specificity, precision, and false alarm rate are equal to 94.3, 100, 91.2, 88.9, and 8.8 percent. All necessary calculations can be accomplished by the developed single-chip FPGA embedded supervising controller. The controller allows high-speed calculations under low power consumption. It characterizes high reliability and low price compared to typically encountered solutions.
Using Petri nets (PNs) to control discrete event systems (DES) has many benefits, because of their graphical representations, the possibility of parallel process control, and their formal descriptions. Amongst the different PNs that are applied for this purpose, most have some limitations for visualization. For many of these PNs, another restriction is the length of time between the creation of the control algorithm in the form of a graph and its practical implementation. These two issues can be resolved with one solution called fuzzy interpreted PN (FIPN). This article proposes the use of a program model based on FIPN to control DES and the method for generation of this model using the graphical representation of the net. FIPN offers a better visualization in comparison to discrete PNs and it allows for the quick creation of program code through the application of a simulator called FIPN-SML. This computer tool implements a method that transforms the graphical form of FIPN into Structured Text (ST) language supported by the IEC 61131-3.
19 February 2014 in IEEE Transactions on Systems, Man, and Cybernetics: Systems
This paper describes a coverability graph that can be used to analyze properties of fuzzy interpreted Petri net. It also proposes a definition of the graph and a detailed algorithm for its construction. An example graph of the net is shown. The results contribute to expanding the existing options of net analysis at the design stage.