The assembly of a two-dimensional (2D) nematic liquid crystal at an interface between two liquids can be exploited to assemble densely packed and highly aligned arrays of rod-like nanoparticles. This method is especially relevant to creating arrays of semiconducting carbon nanotubes (CNTs) for high-performance electronics. When a dense solvent containing CNTs flows over a less dense water subphase in a confined channel, the locally aligned arrays of nanoparticles align globally with the flow direction and can be transferred to the substrate. For large substrates and long channels, the dense solvent tends to slow and create a pool, which then drops through the interface and disturbs the delicate deposition process. Understanding this phenomenon is critical to improving and scaling up similar manufacturing processes. Here, data are collected, and an empirical model is developed to understand and predict the pooling behavior of a suspended fluid flowing over a less dense subphase. The model is demonstrated with two different solvents and proves to be accurate within +/− 15%. With a better understanding of the physics governing the system, the model is then used to suggest methods for minimizing pooling behavior.
Triply periodic minimal surface (TPMS) geometries offer significant potential for compact, high-performance heat exchangers, but the influence of cross-sectional confinement on pressure drop of small-scale TPMS test articles remains unquantified. Truncation of the periodic structure introduces wall-induced edge effects that can substantially distort measured pressure drop and flow uniformity, compromising the extrapolation of sub-scale experimental data to full-scale heat exchanger performance.This study presents the first systematic isolation of the cross-sectional unit cell count effect on Diamond TPMS pressure drop under physical no-slip boundary conditions, combining experimental measurements (1×1 through 6×6 configurations, Re = 125–7500), CFD simulations (Re up to 8000), flow field visualization, and region-resolved hydrodynamic analysis. A curve fit is developed that collapses the per-unit-length pressure drop ratio across the Re = 3000–8000 range into a single equation, enabling direct estimation of the confinement penalty and extrapolation to the infinite-lattice asymptote for the studied geometry. CFD predictions agree with experimental measurements to within a mean absolute error of 9% for the 1×1 through 3×3 configurations and within 15% across the full 1×1 through 6×6 range.Preliminary testing on alternative Diamond TPMS configurations confirmed that the qualitative mechanisms responsible for edge effects extend beyond the specific geometry studied here, though the quantitative magnitude of the confinement penalty is geometry-dependent. Flow field visualization and region-resolved analysis identify the underlying physical mechanisms: corner recirculation in dead-end pockets of rearward-facing lattice peaks and high-velocity channeling through diagonally opposing forward-facing corners produce a previously uncharacterized spatial asymmetry that scales predictably with cross-sectional size. These findings deliver a geometry-specific scaling law for the 75D Diamond TPMS and a transferable mechanistic framework for interpreting sub-scale TPMS test data in nuclear, aerospace, and high-power-density thermal management applications.