Major challenges of controlling human–robot collaboration (HRC)-oriented modular robot manipulators (MRMs) include the estimation of human motion intention while cooperating with a robot and performance optimization. This article proposes a cooperative game-based approximate optimal control method of MRMs for HRC tasks. A harmonic drive compliance model-based human motion intention estimation method is developed using robot position measurements only, which forms the basis of the MRM dynamic model. Based on the cooperative differential game strategy, the optimal control problem of HRC-oriented MRM systems is transformed into a cooperative game problem of multiple subsystems. By taking advantage of the adaptive dynamic programming (ADP) algorithm, a joint cost function identifier is developed via the critic neural networks, which is implemented for solving the parametric Hamilton–Jacobi–Bellman (HJB) equation and Pareto optimal solutions. The trajectory tracking error under the HRC task of the closed-loop MRM system is proved to be ultimately uniformly bounded (UUB) by the Lyapunov theory. Finally, experiment results are presented, which reveal the advantage of the proposed method.
The lunar nearside has been investigated by many uncrewed and crewed missions, but the farside of the Moon remains poorly known. Lunar farside exploration is challenging because maneuvering rovers with efficient locomotion in harsh extraterrestrial environment is necessary to explore geological characteristics of scientific interest. Chang’E-4 mission successfully targeted the Moon’s farside and deployed a teleoperated rover (Yutu-2) to explore inside the Von Kármán crater, conveying rich information regarding regolith, craters, and rocks. Here, we report mobile exploration on the lunar farside with Yutu-2 over the initial 2 years. During its journey, Yutu-2 has experienced varying degrees of mild slip and skid, indicating that the terrain is relatively flat at large scales but scattered with local gentle slopes. Cloddy soil sticking on its wheels implies a greater cohesion of the lunar soil than encountered at other lunar landing sites. Further identification results indicate that the regolith resembles dry sand and sandy loam on Earth in bearing properties, demonstrating greater bearing strength than that identified during the Apollo missions. In sharp contrast to the sparsity of rocks along the traverse route, small fresh craters with unilateral moldable ejecta are abundant, and some of them contain high-reflectance materials at the bottom, suggestive of secondary impact events. These findings hint at notable differences in the surface geology between the lunar farside and nearside. Experience gained with Yutu-2 improves the understanding of the farside of the Moon, which, in return, may lead to locomotion with improved efficiency and larger range.
SUMMARY: A major technical challenge in controlling modular and reconfigurable robots is associated with the kinematics and dynamic model uncertainties caused by reconfiguration. In parallel, conventional model uncertainties such as uncompensated joint friction still persist. This paper presents a modular distributed control technique for modular and reconfigurable robots that can instantly adapt to robot reconfigurations. Under the proposed control method that is based on joint torque sensing, a modular and reconfigurable robot is stabilized joint by joint, and modules can be added or removed without the need to adjust control parameters of the other modules of the robot. Model uncertainties associated with link and payload masses are compensated using joint torque sensor measurement. The remaining model uncertainties, including uncompensated dynamic coupling and joint friction, are compensated by a decomposition-based robust controller. Simulation results have confirmed the effectiveness of the proposed method.
Wheeled mobile robots (WMRs) with variable wheelbases are capable of traveling on deformable terrains and handling complex detection tasks. While the variable wheelbase length of WMR allows it to interact with the terrains adaptively, enhancing its mobility, it brings a control challenge. Inspired by the worm's movement of stretching body at different lengths under different environmental resistance, a creeping gait (CG) strategy is proposed in this work to enable the WMR to be controlled in dual modes: wheeled following mode (WFM) and specified length mode (SLM). WFM adjusts the wheelbase's length by the wheels' movements freely to minimize the internal force and torque between wheels. SLM adjusts the wheelbase's length using a proposed fuzzy logic based algorithm to stabilize the body's posture on rough terrain and overcome specific motion challenges, like escaping wheel sinking. A state-adaptive mode-switching controller is then developed using the dwell time approach to smooth the output velocities during the switching phase, and a Lyapunov analysis is performed to verify its stability. According to the results of physical experiments, three-wheeled mobile robot movements with CG enable more precise path following by 37% and faster response by 11% compared to fixed wheelbase movements, and the dwell time approach achieves smoother speed transitions between the modes than the direct switching method, especially when moving from flat to slope terrain.