Entropy generation for a paramagnetic fluid in a square enclosure with thermomagnetic convection is numerically investigated under the influence of a magnetic quadrupole field. The magnetic field is calculated using the scalar magnetic potential approach. The finite-volume method is applied to solve the coupled equation for flow, energy, and entropy generation. Simulations are conducted to obtain streamlines, isotherms, Nusselt numbers, entropy generation, and the Bejan number for various magnetic forces (1 ≤ γ ≤ 100) and Rayleigh numbers (104 ≤ Ra ≤ 106). In the absence of gravity, the total entropy generation increases with the increasing magnetic field number, but the average Bejan number decreases. In the gravitational field, the total entropy generation respects the insensitive trend to the change of the magnetic force for low Rayleigh numbers, while it changes significantly for high Rayleigh numbers. When the magnetic field enhances, the share of viscous dissipation in energy losses keeps growing.
21 July 2017 in International Journal of Online and Biomedical Engineering (iJOE)
Using wireless sensor networks to collect indoor temperature and humidity data, a monitoring system is built.According to the data of the central processing unit, the state of the current room is analyzed, and the cooling capacity (heat) and air volume of the central air conditioner are calculated. Meanwhile, this system calculates the relevant fees based on the amount of cold (heat) consumed by each user, and provides a more accurate data base for the central air conditioning system for energy efficiency optimization. Theresults show that this system can accurately reflect the environmental status of the target room.Therefore, it is concluded that the indoor environment monitoring system based on wireless sensor network and embedded technology proposed in this paper is effective and feasible.
23 February 2022 in Journal of Thermal Science and Engineering Applications
To meet the heat dissipation of a horizontally mounted chip with high heat flow density, a new type of array pulsating cold end heat pipe was proposed, which consists of a T-shaped hot end and an array pulsating cold end. The special structure is available to drain the hot end of the heat pipe, and the installation method of the cold end has an important influence on heat transfer. For this reason, a detailed experimental study of heat transfer performance was carried out in this paper. It is found that: there is a capillary lifting force at the cold end interface, which prevents the condensate returning to the hot end; therefore, the hot end has to be drained; the drainage methods are divided into hot-end liquid drainage and hot-end capillary drainage, the latter is significantly better than the former; for liquid drainage, the appropriate increase of the filling rate can improve the drainage effect; according to the cold end installation method of the new heat pipe, it can be divided into two kinds of inclined heat pipe and vertical heat pipe, the heat transfer performance of both heat pipes are quite excellent, of which the inclined heat pipe has slightly better drainage and heat transfer performance than the vertical heat pipe, but the gap between the two gradually becomes smaller with the increase of power. Under the same operating conditions, the average temperature of the heat source of the inclined heat pipe with capillary drainage is lower than that of the aluminum fin radiator by 5.79%−10.78%, and the decreasing amplitude increases with the increase of the heating power.