Dietary exposure was introduced as the primary way Bisphenol A (BPA) enters the human body. Although significant efforts have been made to analyze BPA's presence in different foodstuffs, less attention has been given to introducing the conditions that facilitate BPA release. This review aimed to mention possible factors affecting BPA release into foods and beverages. According to the results, the critical factors in BPA release are temperature, manufacturing process, food and packaging type, pH, mineral elements, repeated use, irradiation, washing, contact time, and using detergents. It showed that using PC containers, high temperature and pH, storage under solar irradiation, alkaline detergents, water hardness, and repeated use could increase the BPA release from containers into foodstuff. During various conditions, hydrolysis of the carbonate linkage and d‐spacing will increase. Considering these parameters and limiting the use of PC containers, the potential risk of BPA exposure could be eliminated.

Tea grows in the contaminated soils, absorbs the heavy metals, and enters them into the human food chain. The concentrations of Pb, Cd, Cu, As, and Hg of the imported black tea leaves to Hormozgan Province were evaluated by atomic absorption spectrometer. Then, the Hazard Quotient (HQ) and Hazard Index (HI) levels of heavy metal intakes were calculated to estimate the health hazard for consumers. The Pb, Cd, Cu, As, and Hg concentrations in the Sri Lankan and Indian blank tea were 0.14, 0.017, 11.29, 0.057, 0.0076 mg/kg, and 0.21, 0.02, 14.56, 0.067, 0.01 mg/kg, respectively. It was found that except for As concentration in Indian black tea were higher than Sri Lankan black tea. The HQ and HI levels of all studied metals were less than one, but they were higher in Indian black tea compared with the Sri Lankan black tea. The HI of Indian and Sri Lankan black tea samples were 0.061 and 0.048, respectively, which indicated no significant health hazard for tea consumers. The results showed that the consumption of the studied tea could not have any risk of heavy metal exposure.

The effects of two fermentation processes (common fermentation with Saccharomyces cerevisiae and fermentation by Lacticaseibacillus casei subsp. casei PTCC 1608 and Lactiplantibacillus plantarum subsp. plantarum PTCC 1745) on pH, titratable acidity, total phenolic and flavonoid contents, antioxidant capacity, saponin content, as well as phytic acid content of quinoa dough were investigated during the 24‐h fermentation (4‐h interval). According to the results, the highest titratable acidity was observed in the samples fermented by L. casei subsp. casei. Moreover, the highest antioxidant capacity was observed after 12 h of fermentation by L. plantarum subsp. plantarum (31.22% for DPPH, 104.67% for FRAP) due to a higher concentration of phenolic compounds produced (170.5% for total phenolic content). Also, all samples have been able to reduce saponin by 67% on average. Furthermore, the samples fermented by L. plantarum subsp. plantarum showed the most significant decrease in phytic acid content (64.64%) during 24‐h fermentation. By considering the reduction of the antinutritional compounds and improvement in the antioxidant properties of quinoa flour, the Lactiplantibacillus plantarum strain was recommended.

The oil was extracted from sesame seed with two extraction methods. Traditional (Ardeh oil) and industrial method (cold pressing method: virgin and refined sesame oil) oil extraction was studied to compare the quality and heavy metal content of extracted oils. The chemical properties (fatty acid composition, peroxide, anisidine, acid values, and TOTOX) and heavy metal contents were investigated. The Hazard Quotient (HQ) and Hazard Index (HI) of heavy metal intakes were calculated. The results demonstrated that the predominant fatty acid in oil samples was oleic, linoleic, palmitic, and stearic acids. It was indicated the peroxide, anisidine, acid values, and TOTOX of oil samples were as the order of Ardeh oil > virgin sesame oil > refined sesame oil. The reduction pattern of Pb > Zn >Cu > Cd >As was reported in sesame seed. Although the oil refining had been greatly reduced the Pb of oil sample, but it had yet been much higher than the permissible levels set by Codex Alimentarius. The HQ and HI of all heavy metals were less than one, but they were higher in Ardeh oil compared to others. It is necessary to monitor the presence of heavy metal contaminants and the quality of imported sesame seeds prior to oil preparation.

To investigate the antioxidant activity and physicochemical properties of oil, sunflower (SFO) and corn oil (CO) and their combinations with sesame oil (SO) were prepared. The analyses of fatty acid composition (GC-FID), oxidative stability index (Rancimat), smoke point, and antioxidant activity (DPPH) were done on oil samples. Then, the frying process in presence of potato chips was done for 3 days at 180°C. Oil samples were gathered after each frying cycle and chemical analysis (peroxide value, free fatty acid, p-anisidine value, TOTOX, total polar content, TBARS, and conjugated diene and triene) was measured. The major fatty acid composition of oil samples was linoleic acid, oleic acid, palmitic acid, and stearic acid. The OSI of oil samples was reported as . The smoke point of all samples was in the standard limit. The SFO with 266.50°C had the highest smoke point. The antioxidant activity of samples was reported as . The IC50 of SO was 52.17 mg/g which was higher than other samples. The result of frying indicated that prolonged heating process would increase the thermal oxidation. It was shown that oils blended with SO had good stability during deep frying. Therefore, blending oil with SO is considered as an economic approach to improve the oil oxidation stability.