Plasma coatings play a key role in surface tailoring through providing important advantages for tools during their further application. However, grinding these coatings may cause different defects such as grinding burns and cracks, structural changes to the coating material, and the destruction of adhesive contacts between the coating layer and the substrate. The reason for that is the high heat flux generated in the process of abrasive material removal due to the high friction and stresses. In order to define the optimal conditions for grinding plasma coatings, the mathematical model of the temperature thermal field and the stress–strain state during the grinding process is developed. Based on the temperature, strength, and fracture criteria, this mathematical model makes it possible to define the functional relationship between the technological characteristics of the grinding process and the conditions that provide the required quality of surface processing. The role of the structural defects that are generated while coatings are being sprayed, as well as during coating adhesion, is also considered. An algorithm developed to present the results of the modelling process enables checking if the input parameters meet the condition of zero-defect grinding of a workpiece, and determining an expected surface roughness. Input parameters include the grinding wheel geometry, its abrasive properties, the wheel speed, longitudinal and transverse motion, grinding depth, and the use of the cutting fluid. Experimental testing of this study shows the way in which the regime of the grinding process and different grinding wheel parameters influence the physical and mechanical properties of the surface layer.
Grinding is the most common finishing method for hardened steel parts. Grinding is accompanied by a large heat release in the cutting area, under the influence of which structural changes appear in the thin surface of the processed parts, tensile stress and even microcracks, which significantly reduce the operational reliability of machines that include these parts. The use of abrasive wheels with an intermittent working surface makes it possible to reduce the temperature in the area of contact of abrasive grains with the material of the workpiece and, as a consequence, stabilize the quality of the surface layer of the workpieces. High-frequency vibrations in the elastic system of the machine, accompanying the work of an intermittent wheel, are a positive factor that reduces the energy consumption of the grinding process. However, under certain conditions of dynamic interaction of the tool with the workpiece, parametric resonance may occur, which worsens the geometric and physical-mechanical parameters of the quality of the surface layer of the processed part. The aim of the work is to realize the possibility of predicting the quality parameters of the surface layer of parts during intermittent grinding by studying the influence of the design features of the macrotopography of the working surface of abrasive wheels and processing modes on the nature of the dynamic interaction of the tool with the workpiece and the heat stress in the cutting area. It was found that the parametric vibrations of the elastic system of the machine tool can be shifted to a more stable area, due to an increase in the number of interruptions of the working surface of the abrasive wheel with a constant ratio of the length of the protrusions and depressions. The increase in the number of breaks on the wheel also contributes to a decrease in temperature in the cutting area. It was found that to maintain the stable operation of the elastic system of the machine, it is necessary to reduce the number of cavities on the grinding wheel with an increase in the cutting speed. However, both of these actions are accompanied by an increase in the heat stress of the grinding process. It has been experimentally established that for ordinary (pendulum) grinding, it is possible to achieve an increase in processing productivity by increasing the speed of the longitudinal movement of the table.
3 April 2018 in Eastern-European Journal of Enterprise Technologies
Control systems over the set of technological processes of the installation for ion-plasma application of coatings on metal cutting tools are developed. The purpose of the development is the need to improve the quality and durability of manufactured tools by maintaining more accurate technological parameters of the installation. The result of our research is the developed new nonlinear models of control systems over all stages of operation. At the stage of ionic cleaning, a temperature rise in tool is maintained in line with the set linear program by enabling and disabling the arc discharge. Control system provides for a deviation from the program by ±4.5 K, which is 4 times less than the standard value. At the stage of applying a coating on the tool, the temperature is precisely stabilized in a vacuum chamber by a continuous change in voltage at the substrate, as well as pressure in it by a change in the flow rate of nitrogen into the chamber. Under the action of maximal disturbances, a deviation in pressure, 0.037 Pa, and in temperature, 0.45 K, is ensured. At the stage of cooling, a decrease in temperature is achieved in line with the program by changing the feed of nitrogen into the chamber. Under the action of maximal disturbances, a maximum cooling rate of 0.22 K/s is ensured, which is also better than the standard value. Thus, the application of the developed control systems allowed us to considerably improve tool resistance compared to the installations that are used at present. It is important that the developed control systems are easy to implement and make it possible to ensure high quality of the obtained tools.