In this paper, the influence of the deformation of the flexible ring on the performance of the power rolling ring is studied by the finite element simulation method. The results show that the maximum stress of the flexible ring is concentrated in the contact area with the inner and outer conductive rings, and the maximum bending stress increases significantly from 93.5 MPa to 217 MPa with the increase of deformation from 0.3 mm to 0.7 mm. On the other hand, with the increase of deformation, the oscillation of the velocity curve of the probe point on the flexible ring is weakened and tends to be smooth, indicating that the stability of the motion is gradually improved. The research reveals that increasing the deformation can improve the motion stability and also lead to a significant increase in the contact stress, which provides an important basis for the balance design between structural reliability and motion stability of the power rolling ring.
Mg-Li alloy is widely used in aerospace and military equipment, but the research on its micromechanical mechanism is still insufficient. In this paper, molecular dynamics simulation is used to analyze the nano-indentation response and mechanical mechanism of single crystal Mg-Li. The deformation and hardness changes of Mg-Li under different loads were studied by load–displacement and hardness–depth curves. At the same time, the dislocation defects and equivalent stress are analyzed to reveal the dislocation formation and stress distribution in the process of deformation. Finally, under the condition of stress relaxation, the mechanical behavior of Mg-Li in the process of nano-indentation was revealed, and the deformation mechanism of Mg-Li alloy was studied.