The Physical layer (PHY) is implemented with the new Generalized Frequency Division Multiplexing (GFDM) scheme to increase the throughput of wireless systems in the present communication era. The GFDM system is combined with Multi-Input and Multi Output antenna system (MIMO GFDM) to achieve higher channel capacity and low out-of-coverage probability. Therefore, the MIMO-GFDM system is suffering from internal Inter-Carrier-Interference (ICI) and external Inter-Symbol-Interference (ISI) at the receiver. This makes the receiver design more complex and challenging. Therefore, to cancel the symbol interference in the MIMO-GFDM system, we have proposed a Singular Value Decomposition (SVD) based Zero-Forcing detection scheme for future wireless communications. To decouple unwanted symbols from the transmitted signal, we employed the precoding technique at the transmitter section and the weighted beam forming technique at the receiver section. Furthermore, a famous Water Filling Algorithm (WFA). The proposed scheme reduces the bit error rate to 1.98×10⁻⁴ at 10 dB, outperforming existing detection methods. The WFA improves power allocation efficiency, enhancing channel capacity by up to 3.74 bps/Hz/u in 4x4 MIMO setups.
31 May 2025 in International Journal of Basic and Applied Sciences
The modern communication network depends highly on Device-to-Device (D2D) technology as an essential foundation. Direct communication allows devices to exchange information among themselves. Cloud-edge-device networks enable tasks to execute through several operational procedures. A device working at capacity executes local tasks or transfers them directly to an inactive device by means of D2D technology. The device has two options for delivering workloads, namely an edge-server transfer or a direct cloud-server transfer. Existing methods do not fully exploit D2D-assisted offloading. Such systems fail to maximize the benefits that stem from combining cloud-edge-device op-operations. This makes resource distribution a complex challenge that needs an optimized solution. Traditional solutions find it difficult to produce efficient system solutions. The presented work describes an approach for task offloading mechanisms. The technique determines overall system expenses through optimized management of time, together with energy usage. The method operates to optimize all four critical system factors: task selection and transmission power, with rate and computational resource distribution. The proposal utilizes a combina-tion of deep reinforcement learning methods through SD3. The proposed method merges Softmax Deep Double Deterministic Policy Gradients (SD3) with numerical techniques to achieve its operations. The proposed method operates on multiple smaller components of the primary issue. The SD3-based DRL method controls offloading decisions throughout the system, and the numerical techniques manage power and resource allocation. Extensive simulations were conducted. Seven different scenarios were tested. Research compared the pro-posed method against four traditional solution approaches. Research findings demonstrate the superiority of the proposed solution. The technique both lessens system expenses and optimizes resource usage while generating better operational efficiency. A novel hybrid DRL-based approach for task offloading constitutes the main contribution of this work. The system improves cloud-edge-device partnerships by enabling D2D communication. Machine learning unions with numerical methods create an effective strategy to solve complex optimization tasks.
6 June 2025 in EAI Endorsed Transactions on Internet of Things
INTRODUCTION: This paper presents an innovative deep learning-based optimization technique for orthogonal frequency division multiplexing (OFDM) receivers in wireless communication systems.OBJECTIVES: The proposed method utilizes an enhanced deep convolutional neural network (Enhanced DCNN) architecture with a time-frequency domain fusion mechanism to address the issues of interference and temporal information loss. The model incorporates attention mechanisms and causal convolutions to extract long-term dependencies within the received OFDM signals. It enables accurate channel estimation and signal recovery.METHODS: The methodology is validated using simulations based on 3GPP-defined channel models. It includes extended typical U (ETU), extended pedestrian A (EPA) and extended vehicular A (EVA) across varying signal-to-noise ratio (SNR) conditions.RESULTS: Results demonstrate that the proposed receiver significantly improves bit error rate (BER) performance compared to traditional Least Squares (LS) and LMMSE methods. Particularly, in scenarios with large delay spreads and high mobility. Additionally, the model has a lower computational complexity (CC) and thus is appropriate for real-time implementation.CONCLUSION: We view this work as a strong scheme to improve the performance of OFDM systems in future wireless networks.
30 July 2025 in International Journal of Electrical and Electronics Research
This paper presents a proactive blockage detection algorithm and performance for sub-terahertz (sub-THz) communication systems. It is a critical technology for next-generation wireless networks. Human body blockage is a significant challenge for millimeter wave and sub-THz systems. It often causes severe signal degradation and connectivity loss. Current solutions, such as time-domain approaches or machine learning models. These methods suffer from high computational complexity, limited accuracy and an inability to detect blockages before they occur. The proposed algorithm overcomes these limitations by applying spectral-domain analysis using the short-time Fourier transform (STFT). It provides precise detection of early blockage conditions. The blockage detection algorithm adopts a simple and threshold-based detection mechanism. The algorithm operates in three stages: initialization, active monitoring, and blockage recovery. The proposed algorithm demonstrates a detection probability of 81% and highlights its effectiveness in reliable detection. It detects blockages at least before their occurrence. Additionally, the algorithm achieves a higher mean time to blockage of up to 150ms under optimal parameter settings. These findings highlight the algorithm's effectiveness in mitigating connectivity issues in dense indoor deployments. It is adaptable to different network configurations and is suitable for various deployment scenarios. The proposed solution is well-suited for ultra-reliable low-latency communications, augmented reality, autonomous vehicles, and industrial IoT. These outcomes mark a key step toward seamless 6G communication.