In this paper, a new class of wideband phase shifters on multimode resonator is proposed and developed. Compared with its conventional counterparts, these new phase shifters have a few advantageous features such as simple structure, intrinsic wideband characteristic, large phase-shift value, and easy adjustment in phase shift. The phase properties of multimode resonator are at first studied to derive the quantitative relationship between the phase slope and their respective resonant frequencies. On the one hand, a prescribed wideband phase shift can be achieved by adjusting the impedance ratio R z of the multimode resonator and the electrical length of the reference line. On the other hand, the wide operating band can be intrinsically obtained over a frequency range covered by multiple resonant frequencies in the multimode resonator. In this context, the transmission-line models of the proposed phase shifters are deduced and synthesized to design these phase shifters with a prescribed phase shift value and return loss within the operating band. Moreover, the synthesized model can be directly mapped into all the physical dimensions, thus allowing for a quick design process. Finally, two 180° wideband phase shifters are designed, fabricated, and tested to verify the proposed design method and predicted frequency responses.
14 March 2017 in IEEE Transactions on Microwave Theory and Techniques
In this paper, a new class of filtering differential phase shifters is proposed and developed, which can provide constant phase shift and self-embedded filtering function at the same time. In contrast to its traditional counterparts, the proposed phase shifter consists of two bandpass filter (BPF) branches and the phase properties of generalized nth-order BPF network are systematically studied at first time. With derived closed-form formula of phase slope, the synthesis method is presented to design the proposed filtering differential phase shifters with prescribed arbitrary phase shift value, passband ripple, and bandwidth. The filter order, which dominates frequency selectivity, is considered in the synthesis design of proposed phase shifter as well. The tradeoff between the frequency selectivity and phase shift is discussed. In addition to the advanced features of multifunction and simple geometry, the proposed filtering differential phase shifters can achieve compact size, low amplitude imbalance, and multiway polyphase capability. To validate the proposed concept and synthesis method, two filtering differential phase shifters with single-phase (90°) and five-way polyphase (45°, 90°, 135°, and 180°) are designed, fabricated, and measured. The simulated and measured results coincide well with the prescribed performances in phase shift and magnitude.
9 April 2018 in IEEE Transactions on Microwave Theory and Techniques
In this paper, a new class of wideband filtering phase shifters with a pair of controllable out-of-band transmission zeroes is presented for the first time. The proposed wideband filtering differential phase shifter consists of two stub-loaded multimode resonators (SLMMR) in the main and reference branches, which can provide a constant phase shift and self-realized generalized Chebyshev filtering function with controllable transmission zeroes by properly setting the impedance ratio Rz of the loaded stub. On the one hand, the prescribed phase shift value, phase deviation, and phase shift bandwidth are deduced that basically dominated by resonant modes of SLMMR together with electrical lengths of the phase-shifting lines. On the other hand, the phase properties of transmission zeroes are systematically investigated to demonstrate that they arouse little effect on the phase shift performance, but highly improve the frequency selectivity in theoretical analysis. Based on the presented synthesis method which simultaneously considers wideband phase shift and bandpass filtering function, the circuit parameters of the entire proposed phase shifter can be synthesized with prescribed phase shift value, phase deviation, bandwidth, return loss, and transmission zero positions. Besides, the phase shift and return loss bandwidth can be determined in the design process. As design examples, two 90° wideband filtering phase shifters with different specifications are synthesized, designed, and fabricated to validate our proposed approach.
28 April 2017 in IEEE Transactions on Components, Packaging and Manufacturing Technology
This paper presents a new method for single-layer broadband phase shifter without needing any coupling structure. The phase shifter consists of a multimode resonator and two shunt λ/4 stubs. Meanwhile, the bandwidth of proposed phase shifters can be achieved more than 100%. For prescribed return loss, phase shift value, and phase error, this paper develops a synthesis approach to determine all parameters of designed phase shifter. In addition, both the return-loss bandwidth and phase-error bandwidths can be considered simultaneously so as to determine the return loss and phase error for a desired bandwidth. The 45°, 90°, 135°, and 180° phase shifter are theoretically designed and presented. To validate the design method, a broadband 90° phase shifter is designed, fabricated, and measured. The synthesized, simulated, and measured results are found in good agreement with each other, and the experimental results show that the phase shifter achieves 90° ± 5°, |S11| <; -14 dB, and insertion loss <; 0.7 dB over the bandwidth from 1.43 to 4.45 GHz (102.7%).
14 December 2020 in IEEE Microwave and Wireless Components Letters
In this letter, a new compact filtering power divider (FPD) on the square substrate integrated waveguide (SIW) with wideband isolation is proposed. As the isolation network is embedded in a square SIW cavity, good in-band isolation, compact structure, and low insertion loss can be simultaneously attained. The proposed FPD consists of the coplanar waveguide feeding line of Port 1, the capacitor, a resistor, and the square SIW cavity. TE₁₀₁, TE₂₀₁, and slot-line modes can realize third-order filtering response. Center frequency (f₀) and bandwidth of the filtering response can be independently adjusted. In order to achieve out-of-band isolation, Port 2/3 is placed in the specific position to suppress the high-order modes according to the electric-field distributions of these modes. Finally, a prototype with in-band return loss of 20 dB across 5.59-6.4 GHz is designed at 5.99 GHz. The bandwidths of isolation higher than 21 dB and upper stopband attenuation higher than 20 dB are extended to 2.79f₀ and 2.83f₀, respectively.
30 April 2018 in IEEE Transactions on Microwave Theory and Techniques
In this paper, a new design concept of Schiffman phase shifters under the operation of the second phase period in frequency domain is presented and analyzed. By investigating phase properties of the C-section structure, we first find that its second phase period is another independent and distinctive working region for Schiffman phase shifter, in addition to its first phase period. In contrast to traditional counterparts working on the first phase period, which are suitable for small phase shift from 0° to 90°, the Schiffman phase shifters on the second phase period are suitable for the large phase shift from 90° to 180°. It is because of the opposite phase variation property that the electrical length of reference line gets shortened as the phase shift value increases. Compared with the first phase period, the second phase period can achieve wider phase shift bandwidth under the same coupling degree. This feature is believed to be very useful in the limited realizable coupling degree cases. In this context, the closed-form synthesis formulas of Schiffman phase shifter on the second phase period are presented. Meanwhile, detail theoretical analysis of the phase shift bandwidth and phase deviation is carried out. In final, two Schiffman phase shifters on the first and second phase periods are designed and fabricated to validate our proposed concept and approach in the experiment.