High-precision and real-time modeling are crucial for accelerating the research cycle of next-generation aero-engines. The volumetric dynamics method is acknowledged as the most accurate approach to capture the engine’s transition state process. Nevertheless, the traditional volumetric method encounters challenges, such as neglecting static pressure equilibrium within the mixer and complexities in ascertaining the component volume size when the dynamic simulation time step varies. To address these issues, an improved volumetric dynamics modeling method featuring pressure ratio collaborative updating and the adaptive virtual volume method has been proposed, and a real-time component-level model of a variable cycle engine is established based on this method. The pressure ratio collaborative updating method dynamically updates the pressure ratio of rotating components by inversely calculating the internal and external bypass pressure of the mixer according to static pressure equilibrium constraints and the momentum conservation principle. The adaptive virtual volume method determines the optimal virtual volume size using the particle swarm optimization algorithm, with cosine similarity serving as the evaluation metric. The simulation results indicate that the model based on an improved volumetric dynamics method achieves high accuracy and superior real-time performance. Moreover, compared to traditional modeling methods, the co-operating line of the improved volumetric dynamic method exhibits a smoother transition, signifying a closer resemblance to the real physical process.
Onboard models serve as the foundation for the advanced control and fault diagnosis of aero-engines. Currently, to address the issues of high computational complexity and insufficient real-time performance in component-level aero-engine models, three improvement methods are proposed: constructing the Jacobian matrix along the reverse flow path to avoid redundant calculations; reducing the number of initial guess variables and equations in the engine co-working system through aerothermodynamic analysis, thereby achieving dimensionality reduction in the nonlinear equation sets; and leveraging the minimal variation in Jacobian inverse elements across the full flight envelope to replace them with fixed gains, thus simplifying transient performance calculations. Simulation results demonstrate that, compared to the regular Newton-Raphson method, the reverse flow method reduces the steady-state, regular transient, and small-step transient calculation time by 27.6%, 33.9%, and 30.8%, respectively, with a maximum relative error within 1.6%; the dimensionality reduction method for equations cuts the steady-state, regular transient, and small-step transient calculation time by 20.1%, 11.4%, and 11.8%, with a maximum relative error within 1.4%; and the constant Jacobian matrix inverse method reduces the calculation time by 50.9% during full flight envelope transient performance simulation, with a maximum relative error below 1.6%. All methods improve real-time performance under rated operating conditions. However, only the reverse flow method preserves both high efficiency and accuracy under off-design operating conditions.