Ali CAKMAK

Dr. Ali CAKMAK

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2023 in Materials Science and Technology
Verified
Journal Article
Closed access
ACAli CAKMAK
Ali CAKMAK
AMAbdulkadir Malkocoglu
Abdulkadir Malkocoglu
SOSukru Ozsahin
Sukru Ozsahin
This study aims to determine the optimal CNC (Computer Numerical Control) machining conditions using an artificial neural network. For this purpose, Fagus orientalis, Castanea sativa, Pinus sylvestris, and Picea orientalis wood samples at 8%, 12%, and 15% moisture content (MC) were machined on a CNC router in both across and along the grain directions. Based on the experimental data of surface roughness and cutting power analyses, a total of 16 models were used. These were selected in hundreds of models that have the lowest error. The spindle speed, feed rate, and the number of cutter teeth were chosen to be different with the literature based on the length of cutter mark. As a result, optimum machining parameters were determined for each wood MC.

29 December 2019 in Nevşehir Bilim ve Teknoloji Dergisi
Verified
Journal Article
Closed access
PDF file
ACAli CAKMAK
Ali CAKMAK
AMAbdulkadir Malkoçoğlu
Abdulkadir Malkoçoğlu
Circular saw machines are usually used for cutting of the edge flattened parts to desired dimensions and angles, sizing of panels, grooving, jointing, rebating, etc. For this purpose, it can be stated that the selection of the cutter in machining is very important in terms of product quality and efficiency. It can be indicated that the main factors affecting saw blade selection are material density and humidity, cutting edge shape and type with rake and tool angle. In this study, saw blade geometry, its selection and factors affecting the process were studied in the machining of wood materials in circular sawing machines. Also, the problems and solutions proposal encountered in the circular saws during in sizing are stated.

14 February 2026 in Wood Material Science & Engineering
Verified
Journal Article
Closed access
ACAli CAKMAK
Ali CAKMAK
BBBahadir Cagri Bayram
Bahadir Cagri Bayram

31 October 2022 in TURKISH JOURNAL OF FOREST SCIENCE
Verified
Journal Article
Closed access
PDF file
ACAli CAKMAK
Ali CAKMAK
Odun ve odun kökenli malzemeler mobilya, doğrama ve yapı endüstrilerinde çeşitli makinelerde işlenerek kullanılmaktadır. İşleme mekaniklerine dayalı çeşitli kesme kuvvetleri ortaya çıkmaktadır. Kesme gücü ve güç tüketimi faktörlerinin kesme kuvvetlerine bağlı olduğu belirtilmektedir. Kesiş sürecinin analizinde özellikle kesme kuvvetleri ana çıktı olarak kullanılmakta olup, kesişte etkili faktörlerin daha iyi anlaşılmasında fiziko-mekanik kesiş modelleri oldukça önemlidir. Odun ve odun kökenli malzemelerin fiziksel ve teknolojik özellikleri, makinede işleme koşulları ve kesici aletlerin mekanik durumu işleme mekaniklerini etkileyen faktörler olarak belirtilmektedir. Titreşim, ses, sıcaklık ve işleme kusurları yanında kesme gücü ile yüzey ve yonga kalitesi genellikle göz önünde bulundurulmamaktadır. İşlemede en düşük güç tüketimi ile düzgün yüzeyler elde edilebilmesi bakımından verimli ve ekonomik çalışmalar ile uygun işleme koşullarının belirlenmesi, malzeme ve kesici geometrisi ile işleme mekaniklerine dayandırılmaktadır. Bu araştırmada, odun ve odun kökenli malzemelerin işlenmesinde işleme mekaniklerini etkileyen faktörler tartışılmıştır. Kesme kuvvetleri, kesme gücü ve bunların ölçüm yöntemleri ile kesici ve işleme geometrisi incelenmiştir.

25 November 2025 in The Journal of Adhesion
Verified
Journal Article
Closed access
HOHasan Ozturk
Hasan Ozturk
ADAydın Demir
Aydın Demir
ABAbdullah Ugur Birinci
Abdullah Ugur Birinci
OİOKAN İLHAN
OKAN İLHAN
ACAli CAKMAK
Ali CAKMAK
Engin Derya GezerEngin Derya Gezer
Engin Derya Gezer

4 October 2026 in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
Verified
Journal Article
Open access
ACAli CAKMAK
Ali CAKMAK
This study focused on the influence of machining parameters and wood properties on cutting power in the CNC milling of Oriental beech and Scots pine. The results indicated that the statistical models were highly significant (p < 0.001) with explanatory powers of 82.5% for Oriental beech and 87.2% for Scots pine. The cutting power of Oriental beech was greater than that of Scots pine because of the higher density and compact structure of Oriental beech. The order of importance of the machining parameters on the cutting power was spindle speed, depth of cut, feed rate, and cutting direction for both species, respectively. Width of cut had a greater effect on Scots pine than on Oriental beech. The species-specific machining behavior was observed between Oriental beech and Scots pine, and cutting power generally increased with increasing spindle speed, feed rate, and depth of cut. There were significant interactions between the machining parameters, especially feed rate × depth of cut and spindle speed × width of cut, which suggested that the machining parameters should be optimized as a whole instead of individually. Therefore, the findings of this study could help to select suitable cutting conditions and maintain the sharpness of cutting tools to reduce energy consumption, improve machining quality, and develop sustainable wood manufacturing.