A common full-color method involves combining micro-light-emitting diodes (LEDs) chips with color conversion materials such as quantum dots (QDs) to achieve full color. However, during color conversion between micro-LEDs and QDs, QDs cannot completely absorb incident wavelengths cause the emission wavelengths that including incident wavelengths and converted wavelength through QDs, which compromises color purity. The present paper proposes the use of a recycling-reflection color-purity-enhancement film (RCPEF) to reflect the incident wavelength multiple times and, consequently, prevent wavelength mixing after QDs conversion. This RCPEF only allows the light of a specific wavelength to pass through it, exciting blue light is reflected back to the red and green QDs layer. The prototype experiment indicated that with an excitation light source wavelength of 445.5 nm, the use of green QDs and RCPEFs increased color purity from 77.2% to 97.49% and light conversion efficiency by 1.97 times and the use of red QDs and RCPEFs increased color purity to 94.68% and light conversion efficiency by 1.46 times. Thus, high efficiency and color purity were achieved for micro-LEDs displays. Graphical
To realize high-efficiency AlGaN-based deep-ultraviolet light-emitting diodes (DUV-LEDs), enhancing their light-extraction efficiency (LEE) is crucial. This paper proposes an aluminum-based sidewall reflector structure that could replace the conventional ceramic-based packaging method. We design optimization simulations and experimental results demonstrated the light power output could be enhanced 18.38% of DUV-LEDs packaged with the aluminum-based sidewall.
Mini-light-emitting diodes (mini-LEDs) were combined with multiple three-dimensional (3D) diffuse reflection cavity arrays (DRCAs) to produce thin, large-area, high-brightness, flat light source modules. The curvature of the 3D free-form DRCA was optimized to control its light path; this increased the distance between light sources and reduced the number of light sources used. Experiments with a 12.3-inch prototype indicated that 216 mini-LEDs were required for a 6 mm optical mixing distance to achieve a thin, large-area surface with high brightness, uniformity, and color saturation of 23,044 cd/m2, 90.13%, and 119.2, respectively. This module can serve as the local dimming backlight in next generation automotive displays.
The demand for extra-thin, large-area, and high-luminance flat-panel displays continues to grow, especially for portable displays such as gaming laptops and automotive displays. In this paper, we propose a design that includes a light guide layer with a microstructure above the mini-light-emitting diode light board. The light control microstructure of concave parabel-surface microlens arrays on a light-emitting surface increases the likelihood of total internal reflection occurring and improved the uniformity merit function. We used a 17 in prototype with quantum-dot and optical films to conduct our experiments, which revealed that the thickness of the module was only 1.98 mm. When the input power was 28.34 watts, the uniformity, average luminance, and CIE 1931 color space NTSC of the prototype reached 85%, 17,574 cd/m2, and 105.37%, respectively. This module provided a flat light source that was extra thin and had high luminance and uniformity.
This study proposes a novel direct-lit mini-chip-scale packaged light-emitting diode (mini-CSPLED) backlight unit (BLU) that used quantum dot (QD) film, diffusion plate, and two prism films to improve brightness uniformity. Three different luminous intensity units, 120° mini-CSPLED, 150° mini-CSPLED, and 180° mini-CSPLED with different emission angle structures were fabricated using a CSP process. In terms of component characteristics, although the 180° mini-CSPLED light output power is about loss 4% (at 10 mA) compared with 150° mini-CSPLED, it has a large emission angle that forms a planar light source that contributes to improving the BLU brightness uniformity and reduced quantity of LEDs at the same area. In terms of BLU analysis, the blue mini-CSPLEDs with different emission angles excite the different QD film thicknesses; the chromaticity coordinates conversion to the white light region. The BLU brightness increases as the QD film thickness increases from 60, 90, and 150 μm. This result can achieve a brightness uniformity of 86% in a 180° mini-CSPLED BLU + 150-μm-thick QD films as compared to the 120° mini-CSPLED BLU and 150° mini-CSPLED BLU.
Displays composed of micro-light-emitting diodes (micro-LEDs) are regarded as promising next-generation self-luminous screens and have advantages such as high contrast, high brightness, and high color purity. The luminescence of such a display is similar to that of a Lambertian light source. However, owing to reduction in the light source area, traditional secondary optical lenses are not suitable for adjusting the light field types of micro-LEDs and cause problems that limit the application areas. This study presents the primary optical designs of dielectric and metal films to form highly reflective thin-film coatings with low absorption on the light-emitting surfaces of micro-LEDs to optimize light distribution and achieve full-angle utilization. Based on experimental results with the prototype, that have kept low voltage variation rates, low optical losses characteristics, and obtain the full width at half maximum (FWHM) of the light distribution is enhanced to 165° and while the center intensity is reduced to 63% of the original value. Hence, a full-angle micro-LEDs with a highly reflective thin-film coating are realized in this work. Full-angle micro-LEDs offer advantages when applied to commercial advertising displays or plane light source modules that require wide viewing angles.