The present study analysed the performance of an integrated settler based anaerobic biofilm reactor (ISBABR) for domestic wastewater treatment at two hydraulic loading conditions as an onsite sanitation system. The ISBABR is designed on the basic concept of conventional septic tanks and anaerobic biofilm reactors. The ISBABR was run on actual sewage after inoculating it with digested sludge, whose COD (Chemical oxygen demand) and VSS (Volatile suspended solids) values were 9.65 and 7.13 g/l respectively. The system was operated on steady and non-steady hydraulic loading conditions while maintaining 24 h HRT for 4 consecutive months. The average removal efficiency of the system in terms of TSS (Total suspended solids), BOD (Biochemical oxygen demand) and COD was found to be 90.09 ± 4.5%, 89.89 ± 3.2% and 87.89 ± 5.2% respectively, under both the hydraulic loading conditions. In bacterial analysis, the removal efficiency of the system in terms of TC (Total coliform) and FC (Fecal coliform) was found to be 85.5 ± 4.9% and 96.36 ± 1.5% respectively. The morphology of the sludge showed the presence of anaerobes, which was a good indicator for the system. The results of the present study prove that the ISBABR is perfect system for onsite sanitation.
The growing population and increasing urbanization have led to a surge in domestic wastewater generation, posing significant challenges for effective and sustainable treatment. The present study demonstrates a novel and sustainable approach for the onsite treatment of domestic wastewater using an integrated settler-based biofilm reactor (ISBR) with efficient biogas generation. The ISBR provides an optimized environment for the growth of biofilm, facilitating the removal of organic pollutants and pathogens. Moreover, the ISBR enables the recovery of a valuable resource in the form of biogas, thus enhancing the overall utility of the treatment process. The performance of the ISBR was comprehensively evaluated at laboratory scale through treating the actual domestic wastewater generated from the hostel of Manipal University Jaipur. The ISBR system was operated under an ambient environment at a hydraulic retention time (HRT) of 24 h. The results demonstrated remarkable efficiency in terms of chemical oxygen demand (COD), total suspended solids (TSS), and coliforms removal, with average removal efficiency being more than 90%. According to the COD mass balance analysis, 48.2% of the influent COD was recovered as bioenergy. The chromatogram revealed a high percentage of methane gas in the collected biogas sample. The field emission scanning electron microscope (FESEM) analysis of the accumulated sludge in the ISBR system depicted the morphology of methanogenic bacteria. Both the experimental and theoretical results confirmed the feasibility and sustainability of the ISBR system at the onsite level.
18 August 2021 in International Journal of Chemical Reactor Engineering
The present study identifies the hydraulic efficiency of a novel onsite sanitation system at variable hydraulic shock loading conditions. The system consisted of three chambers, each working as an up-flow anaerobic bioreactor, accommodated within a single unit. The hydraulic characteristics were identified with the help of residence time distribution (RTD) analysis by step feeding of lithium chloride (LiCl) solution into the system. The experiments were run at variable hydraulic loading conditions at different peak flow factors (PFF) of 1, 2, 4 and 6 while maintaining 24-h hydraulic retention time. As revealed in the RTD analysis, the biofilm reactor achieved a very good hydraulic efficiency that varied from 0.76 to 0.81 at PFF 1, 2 and 4. Although in the case of PFF6, it was comparatively low. It was noted that the dispersion number was always below 0.2 at variable hydraulic shock loading conditions under different PFFs, which indicated that the reactor behaved perfectly between mixed-flow and plug-flow reactor. The system was also able to achieve good pollutant removal efficiency for chemical oxygen demand (COD) and total suspended solids (TSS) under all PFFs, which was more than 68 and 75%, respectively.