A forest fire is a natural disaster that destroys forest resources, thus having a severe impact on humans and on the animals and plants that depend on the forest environment. This paper presents a model for predicting the scale of forest wildfires of Alberta, Canada. A fire's scale is determined by the combination of the fire's duration and the size of the area it burns. Our prediction model enables fire rescuers to take appropriate measures to minimize damage caused by a wildfire based on its predicted scale in the fire's early stages. The modeling data were collected from the Canada National Fire Database (CNFDB) published by Natural Resources Canada, which includes wildfire and meteorological data for Alberta, Canada. The size of the burned area and the fire's duration were used to estimate the scale of a wildfire. After multi-collinearity testing and feature normalization, the data were divided into training and testing sets. Taking the meteorological factors as input values, a backpropagation neural network (BPNN), a recurrent neural network (RNN), and long short-term memory (LSTM) were implemented to establish prediction models. Of these classification methods, LSTM exhibited the highest accuracy, 90.9%. The results indicate that it is feasible to predict the scale of a forest wildfire at the beginning of its occurrence using meteorological information.

This article presents a non-destructive methodology to determine the modulus of elasticity (MOE) in static bending of wood through the use of near-infrared (NIR) spectroscopy. Wood specimens were obtained from Quercus mongolica growing in Northeast of China. The NIR spectra of specimens were acquired by using a one-chip NIR fiber optic spectrometer whose spectral range was 900~1900 nm. The raw spectra of specimens were pretreated by multiplication scatter correlation and Savitzky-Golay smoothing and differentiation filter. To reduce the dimensions of data and complexity of modeling, the synergy interval partial least squares and successive projections algorithm were applied to extract the characteristic wavelengths, which had closing relevance with the MOE of wood, and five characteristic wavelengths were selected from full 117 variables of a spectrum. Taking the characteristic wavelengths as input values, partial least square regression (PLSR) and the propagation neural network (BPNN) were implemented to establish calibration models. The predictive ability of the models was estimated by the coefficient of determination (r_p) and the root mean square error of prediction (RMSEP) and in the prediction set. In comparison with the predicted results of the models, BPNN performed better results with the higher r_p of 0.91 and lower RMSEP of 0.76. The results indicate that it is feasible to accurately determine the MOE of wood by using the NIR spectroscopy technique.

The in situ non-destructive quantitative observation of plant roots is difficult. Traditional detection methods are not only time-consuming and labor-intensive, but also destroy the root environment. Ground penetrating radar (GPR), as a non-destructive detection method, has great potential in the estimation of root parameters. In this paper, we use GprMax software to perform forward modeling of plant roots under different soil dielectric constants, and analyze the situation of plant roots with different dielectric constants and different root diameters under 1.5 GHz frequency antenna detection. Firstly, root systems with increasing diameter under different values of root and soil dielectric constant were scanned. Secondly, from the scanning results, two time points $T_1$ and $T_2$ of radar wave entering and penetrating the root system were defined, and the correlation between root diameter $D$ and time interval $\Delta T$ between $T_1$ and $T_2$ was analyzed. Finally, the least square regression model and back propagation (BP) neural network model for root diameter parameter estimation were established, and the estimation effects of the two models were compared and evaluated. The research results show that the root diameter (12–48 mm) is highly correlated with the time interval. Given the dielectric constants of the root and soil, the prediction results of the two models are accurate, but the prediction result of the neural network model is more stable, and the residual between the predicted value and the actual value is mainly concentrated in the [−1.5 mm, 1.5 mm] range, as well as the average of prediction error percentage being 3.62%. When the dielectric constants of the root and soil are unknown, the accuracy of the prediction results of the two models is decreased, but the stability of the neural network model is still superior to the least squares model, and the residual error is mainly concentrated in the range of [−5.3 mm, 5.0 mm], the average of prediction error percentage is 10.19%. This study uses GprMax to simulate root system detection and reveals the theoretical potential of GPR technology for non-destructive estimation of root diameter parameters. It is also pointed out that in the field exploration process, if the dielectric constants of the root and soil in the experimental site are sampled and measured first, the prediction accuracy of the model for root diameter would be effectively improved. This research is based on simulation experiments, so further simulation followed by laboratory and field testing is warranted using non-uniform roots and soil.

Attention to the natural environment is equivalent to observing the space in which we live. Plant roots, which are important organs of plants, require our close attention. The method of detecting root system without damaging plants has gradually become mainstream. At the same time, machine learning has been achieving good results in recent years; it has helped develop many tools to help us detect the underground environment of plants. Therefore, this article will introduce some existing content related to root detection technology and machine detection algorithms for root detection, proving that machine learning root detection technology has good recognition capabilities.

Analysis of a tree ring is the primary method for determining the growth and age of a tree. In a microdestructive tree-ring measurement system, the tree under test is drilled with a microdrill at a constant rotating speed to detect the difference in density between the early and late wood, thereby realizing a microdestructive measurement of the tree-ring. The measurement system comprises a microdrill with a diameter of 3 mm, mechanical transmission, direct current (DC) servomotor, stepper motor, and control and detection circuit. The DC servomotor and stepper motor realize rotation and translation of the microdrill, respectively, through mechanical transmission. When the microdrill rotates and drills into the tree, the control and detection circuit samples and acquires the armature current of the DC servomotor, which is proportional to the resistance encountered by the drill bit and reflects the change in the density of the tree. The tree-ring number can be obtained by filtering the sampled original signals of the armature current using a finite impulse response (FIR) filtering algorithm. The annual rings of larch and fir tree discs were measured and tested using the designed system. It was observed that the average annual ring measurement accuracy of the larch discs reached 95.28%, while that of the fir discs was 84.16%. The diameter of the drill hole in the trunk was less than 3 mm after measuring the living wood, thereby achieving a microdestructive measurement of the tree-ring.

To achieve a rational allocation of limited water resources, and formulation of an appropriate irrigation system, this research studied the change characteristics of stem water content (StWC) in plant and its response to environmental factors. In this study, the StWC and environmental factors of Lagerstroemia indica in Beijing were continuously observed by a BD-IV plant stem water content sensor and a forest microclimate monitoring station from 2017 to 2018. The variation of StWC and its correlation with environmental factors were analyzed. The results showed that the StWC of Lagerstroemia indica varies regularly day and night during the growth cycle. Meanwhile, the rising time, valley time, and falling time of StWC were various at the different growth stages of Lagerstroemia indica. The results of correlation analysis between StWC and environmental factors indicated that the StWC of Lagerstroemia indica was positively correlated with air relative humidity, while it was negatively correlated with total radiation and air temperature. The multiple regression equation of StWC and environmental factors of Lagerstroemia indica was StWC=11.789−1.402Rn−0.931T−1.132Ws+0.933RH−3.368ST+2.168SMC, and the coefficient of determination of the equation was of 0.87. Furthermore, the results illustrated that the irrigation should pay attention to supplementing irrigation in time during the peak growing season of fruit.