Magdalena Schreter

Ms. Magdalena Schreter

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2023 in Acta Mechanica
Verified
Journal Article
Open access
PDF file
TMThomas Mader
Thomas Mader
MSMagdalena Schreter
Magdalena Schreter
OSOlena Shkundalova
Olena Shkundalova
MNMatthias Neuner
Matthias Neuner
GHGuenter Hofstetter
Guenter Hofstetter
3D printing of concrete is a promising construction technology, offering the potential to build geometrically complex structures without the use of cost-intensive formwork. The layer-wise deposit of filaments during the 3D printing process results in an intrinsic orthotropic mechanical behavior in the hardened state. Beyond that, the material behavior of 3D printed concrete (3DPC) is governed by a highly nonlinear behavior, characterized by irreversible deformations, strain hardening, strain softening and a degradation of the material stiffness. In this contribution, a new constitutive model for describing the orthotropic and highly nonlinear material behavior of 3DPC will be presented. It is formulated by the extension of a well-established isotropic damage plasticity model for concrete to orthotropic material behavior by linear mapping of the stress tensor into a fictitious isotropic configuration. The performance of the new model will be evaluated by finite element simulations of three-point bending tests of 3DPC samples, performed for different orientations of the loading direction relative to the printing direction and comparison with experimental results. In addition, the applicability of the model to replicate the mechanical behavior of 3DPC, manufactured by the alternative 3D printing process of binder jetting of cementitious powders, will be demonstrated by 3D finite element simulations of an arch structure with varying orientations of the loading direction relative to the layering. Overall, the proposed model provides a computationally efficient modeling approach for large-scale finite element simulations of 3DPC structures, being a promising alternative to complex and computationally expensive finite element models considering distinct interfacial planes.

1 March 2020 in Computers and Geotechnics
Verified
Journal Article
Closed access
MNMatthias Neuner
Matthias Neuner
MSMagdalena Schreter
Magdalena Schreter
PGPeter Gamnitzer
Peter Gamnitzer
GHG. Hofstetter
G. Hofstetter

1 October 2018 in Tunnelling and Underground Space Technology
Verified
Journal Article
Closed access
MSMagdalena Schreter
Magdalena Schreter
MNMatthias Neuner
Matthias Neuner
DUD. Unteregger
D. Unteregger
GHG. Hofstetter
G. Hofstetter

20 June 2018 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MSMagdalena Schreter
Magdalena Schreter
MNMatthias Neuner
Matthias Neuner
GHGuenter Hofstetter
Guenter Hofstetter
In the present publication, the performance of an implicit gradient-enhanced damage-plasticity model is evaluated with special focus on the prediction of complex failure modes such as shear failure. Hence, it complements studies on predominant mode I failure frequently found in the literature. To this end, an implicit gradient-enhanced damage-plasticity rock model is presented and validated by means of 2D and 3D finite element simulations of both laboratory tests on intact rock specimens as well as a large-scale structural benchmark related to failure of rock mass. Thereby, a wide range of loading conditions comprising unconfined and/or confined, tensile and/or compressive stress states is considered. The capability of the gradient-enhanced rock model for representing the mechanical response objectively with respect to the finite element discretization and realistically compared to measurement data is assessed. It is shown that complex failure modes and the respective load–displacement curves are predicted in a mesh-insensitive manner.

21 January 2022 in International Journal for Numerical and Analytical Methods in Geomechanics
Verified
Journal Article
Open access
PDF file
TMThomas Mader
Thomas Mader
MSMagdalena Schreter
Magdalena Schreter
GHGuenter Hofstetter
Guenter Hofstetter
The nonlinear mechanical behavior of intact rock and rock mass is characterized by irreversible deformation, associated with strain hardening, strain softening and degradation of stiffness. In the case of stratified rock types like shales or phyllites, the mechanical behavior additionally depends on the loading direction with respect to the orientation of the principal material directions, resulting in inherent anisotropic material behavior, or in many cases more specifically in transversely isotropic material behavior. On the basis of a critical review of several approaches for modeling nonlinear anisotropic material behavior, proposed in the literature, the linear mapping of the Cauchy stress tensor into a fictitious isotropic configuration, originally proposed by Boehler [1], was identified as the best choice for the application in 3D finite element simulations. Within this framework, an isotropic damage plasticity model for rock, proposed by Unteregger et al. [2], extended to inherent transversely isotropic behavior is presented. It is implemented into a FE‐program by means of the return mapping algorithm and it is regularized by an over‐nonlocal implicit gradient enhancement for ensuring mesh‐insensitive results. For validation, numerical simulations of triaxial compression tests on Tournemire shale, documented in Niandou et al. [3], are performed at both the integration point level and the structural level. The performance of the constitutive model is assessed by its ability to predict the complex direction‐dependent mechanical behavior of transversely isotropic rock and the failure modes observed in triaxial compression tests with different confining pressures and different inclination angles of the stratification planes with respect to the direction of axial loading.

25 May 2017 in Materials
Verified
Journal Article
Open access
PDF file
MNMatthias Neuner
Matthias Neuner
MSMagdalena Schreter
Magdalena Schreter
DUDavid Unteregger
David Unteregger
GHGuenter Hofstetter
Guenter Hofstetter
The aim of the present paper is to investigate the influence of the constitutive model for shotcrete on the predicted displacements and stresses in shotcrete shells of deep tunnels. Previously proposed shotcrete models as well as a new extended damage plasticity model for shotcrete are evaluated in the context of 2D finite element simulations of the excavation of a stretch of a deep tunnel by means of the New Austrian Tunneling Method. Thereby, the behavior of the surrounding rock mass is described by the commonly used Hoek–Brown model. Differences in predicted evolutions of displacements and stresses in the shotcrete shell, resulting from the different shotcrete models, are discussed and simulation results are compared to available in situ measurement data.