Torsional vibration is the primary cause of engine crankshaft failure. Consequently, the reduction of engine vibration is of paramount importance for the enhancement of automotive safety and comfort. However, the lack of comprehensive insight into the damping mechanism of the torsional damper has impeded the effective control of engine torsional vibration. In order to gain insight into the vibration characteristics of the shaft system in an inline six-cylinder diesel engine, an analysis of the system’s behaviour during both free and forced vibration was conducted. A mathematical relationship was deduced between the dimensions, material, operational temperature and damping properties of the silicone oil damper. The objective was to determine the optimal damping and moment of inertia of the damper, with the aim of minimizing the torsional amplitude of the sixth harmonic. The results demonstrate a reduction in the six-harmonic torsional amplitude from 0.32° to 0.14° following the installation of the damper. The mean and relative deviations between the calculated and experimental results are 0.0018° and 0.83%, respectively. To facilitate the design of the silicone oil damper, a software program, Vibsim, was developed based on Visual Studio for the design and torsional vibration analysis of the silicone oil damper. This software is reliable in calculating results and is user-friendly.
1 February 2021 in Journal of Manufacturing Processes
An increasing demand exists within the automotive industry to utilize aluminum alloy sheets because of their excellent strength-weight ratio and low emissions, which can improve fuel economy and reduce environmental pollution. High-speed automobile impactions are complicated and highly nonlinear deformation processes. Thus, in this paper, a Gurson-Tvergaard-Needleman (GTN) damage model is used to describe the damage behavior of high-speed electromagnetic impaction to predict the fracture behavior of 5052-O aluminum alloy under high-speed impaction. The parameters of the GTN damage model are obtained based on high-speed electromagnetic forming experiments via scanning electron microscopy. The high-speed electromagnetic impaction behavior process is analyzed according to the obtained GTN model parameters. The shape of the high-speed electromagnetic impaction in the numerical simulations agrees with the experimental results. The analysis of the plastic strain and void volume fraction distributions are analyzed during the process of high-speed impact, which indicates the validity of using the GTN damage model to describe or predict the fracture behavior of high-speed electromagnetic impaction.