The molten salt reactor (MSR) is one of the six advanced reactor concepts selected by Generation IV International Forum (GIF) because of its inherent safety and the promising capabilities of TRU transmutation and Th-U breeding. In this study, a three-dimensional thermal-hydraulic model (3DTH) is developed for evaluating the steady-state performance of the graphite-moderated channel type MSR. The coupled code is developed by exchanging the power distribution, temperature, and fuel density distribution between SCALE and 3DTH. Firstly, the thermal-hydraulic model of the coupled code is validated by RELAP5 code. Then, the mass flow distribution, temperature field, keff, and power density distribution for a conceptual design of the 2MWt experimental molten salt reactor are calculated and analyzed by the coupled code under both normal operating situation and the central fuel assembly partly blocked situation. The simulated results are conductive to facilitate the understanding of the steady behavior of the graphite-moderated channel type MSR.

Nuclear graphite plays a crucial role in thermal-spectrum thorium molten salt reactors (TMSRs) as both the neutron moderator and the construct for the coolant flowing channel. When subjected to irradiation and elevated temperatures, graphite components experience considerable deformation due to a combination of dimensional changes, thermal expansion, irradiation creep, elastic deformation, and changes in thermomechanical characteristics. The lifespan of the graphite component is a limiting factor in TMSR designs as it strongly correlates with the dimensional changes of the graphite. To evaluate the thermal and mechanical reactions of graphite component under TMSR core conditions, it is necessary to couple models of thermal-hydraulics, neutronics, and thermal-mechanics. This paper presents an enhanced methodology for analyzing the deformation of graphite components using the finite element method. Then, this method was applied to analyze a 10-year deformation history of a hexagonal prism assembly (HPA) and it was compared with the traditional hexagonal round channel assembly (RCA). The results demonstrate that the stress–strain field of both types of graphite components undergo significant variations with the increasing neutron fluence from irradiation. HPA graphite exhibits a slower deformation as compared to RCA graphite when subjected to identical operating conditions. In this case, HPA graphite has a lifespan of approximately 10 years, while RCA graphite lasts only 8.8 years.