A dual-wavelength (DW) Pr3+:LiLuF4 (Pr:LLF) laser with the same threshold and slope efficiency was achieved for the first time. We theoretically deduced the conditions for obtaining the same threshold and slope efficiency of the DW operation, and experimentally demonstrated the orange-red DW Pr:LLF laser by optimizing the output coupling transmittance and adjusting the rotation angle of the intracavity Lyot filter. A CW orange-red DW laser, pumped by a 10 W 479 nm frequency-doubled optically pumped semiconductor laser (2ω-OPSL), delivers combined outputs of 607 nm and 640 nm with a total power of 2.69 W. The orange and red wavelengths maintained balanced power output under each pump level. Furthermore, by a type-I critical phase-matched (CPM) β-BaB2O4 (BBO) crystal, a CW ultraviolet (UV) second harmonic generation (SHG) at 312 nm was also obtained through intracavity sum-frequency mixing (SFM) of the 607 nm and 640 nm fundamental beams, achieving a maximum power output of 812 mW.
A continuous-wave (CW) orthogonally polarized dual-wavelength (OPDW) Pr3+:LiLuF4 (Pr:LLF) green laser with a balanced output power on the 3P0→3H5 transition was demonstrated for the first time. We theoretically analyzed the conditions for achieving equal output power in the OPDW laser operation using two intracavity etalons and experimentally realized the OPDW green laser in a Pr:LLF crystal. Under pumping with a frequency-doubled optically pumped semiconductor laser (2ω-OPSL) generating 10 W at 479 nm, an OPDW green laser at 546 nm in π-polarization and 550 nm in σ-polarization was obtained with a total output power of 1.68 W. The output powers of the two wavelengths were equal for all the pump power levels. Further, a CW ultraviolet (UV) laser at 274 nm by intracavity sum-frequency mixing was also achieved with a maximum output power of 386 mW. The OPDW Pr:LLF green lasers with the balanced output power were desirable for medical detection and the generation of UV lasers.
An orthogonally polarized green dual-wavelength (OPGDW) laser output in a Pr3+:LiLuF4 (Pr:LLF) crystal with the power ratio of 1:1 was realized for the first time. We calculated the condition for obtaining the identical power of the two output wavelengths and achieved the OPGDW laser by adjusting the tilt angle of the intracavity etalon and optimizing the output coupling transmittance. Using a frequency-doubled (2ω) optically pumped semiconductor (OPS) laser of 10 W at 479 nm, a continuous wave (CW) OPGDW laser output at 523 nm (π-polarized) and 538 nm (σ-polarized) was achieved with a combined power of 1.83 W. In addition, by type-II critical phase-matched (CPM) β-BaB2O4 (BBO) nonlinear crystal, a 57 mW, 265 nm CW UV laser was also realized by sum-frequency generation (SFG) of 523 nm and 538 nm wavelengths. CW OPGDW lasers with identical power output were ideal for both medical detection and generating UV lasers.
A continuous-wave (CW) orthogonally polarized single-wavelength red laser (OPSRL) at 698 nm with a tunable power ratio within a wide range between the two polarized components was demonstrated using two Pr3+:LiLuF4 (Pr:LLF) crystals for the first time. Through control of the waist location of the pump beam in the active media, the output power ratio of the two polarized components of the OPSRL could be adjusted. Under pumping by a 20 W, 444 nm InGaN laser diode (LD), a maximum total output power of 4.12 W was achieved with equal powers for both polarized components, corresponding to an optical conversion efficiency of 23.8% relative to the absorbed pump power. Moreover, by a type-II critical phase-matched (CPM) BBO crystal, a CW ultraviolet (UV) second-harmonic generation (SHG) at 349 nm was also obtained with a maximum output power of 723 mW. OPSRLs can penetrate deep tissues and demonstrate polarization-controlled interactions, and are used in bio-sensing and industrial cutting with minimal thermal distortion, etc. The dual-polarized capability of OPSRLs also supports multi-channel imaging and high-speed interferometry.
Using tunable in-band laser diode (LD) pumping (791.1–798.2 nm), an orthogonally polarized dual-wavelength (OPDW) Nd:LaMgAl11O19/Nd:SrAl12O19 (Nd:LMA/Nd:SA) operation at 1297 nm and 1306 nm for the 4F3/2 → 4I13/2 transition is demonstrated for the first time. Optimization of LD temperature and pump focus position enabled efficient generation of both wavelengths at balanced power. The maximum combined continuous-wave (CW) output reached 3.32 W at 1297 nm and 1306 nm with a near 1:1 power ratio. Relative to the absorbed 796.56 nm pump power, the laser achieved maximum total slope efficiency and optical-to-optical conversion efficiency of 20.7% and 18.5%, respectively. This 1297 nm and 1306 nm OPDW source shows significant potential for medical and scientific applications.