Iterative learning control (ILC) typically requires strict repeatability in initial states, trajectory length, external disturbances, and system dynamics. However, these assumptions are often difficult to fully satisfy in practical applications. While most existing studies have achieved limited progress in relaxing either one or two of these constraints simultaneously, this work aims to eliminate the restrictions imposed by all four strict repeatability conditions in ILC. For general finite-duration multi-input multi-output (MIMO) linear discrete-time systems subject to multiple non-repetitive uncertainties—including variations in initial states, external disturbances, trajectory lengths, and system dynamics—an innovative open-closed loop robust iterative learning control law is proposed. The feedforward component is used to make sure the tracking error converges as expected mathematically, while the feedback control part compensates for missing tracking data from previous iterations by utilizing real-time tracking information from the current iteration. The convergence analysis employs an input-to-state stability (ISS) theory for discrete parameterized systems. Detailed explanations are provided on adjusting key parameters to satisfy the derived convergence conditions, thereby ensuring that the anticipated tracking error will eventually settle into a compact neighborhood that meets the required standards for robustness and convergence speed. To thoroughly assess the viability of the proposed ILC framework, computer simulations effectively illustrate the strategy’s effectiveness. Further simulation on a real system, a piezoelectric motor system, verifies that the ILC tracking error converges to a small neighborhood in the sense of mathematical expectation. Extending the ILC to complex real-world applications provides new insights and approaches.
A broadband, efficient monolithic microwave integrated circuit power amplifier (MMIC PA) in OMMIC’s 0.1 μm GaN-on-Si technology for 5G millimeter-wave communication is presented. This study concentrates on the output matching design, which has an important influence on the PA’s performance. A compact one-order synthesized transformer network (STN) is adopted to match the 50 Ω load to the extracted large-signal output model of the transistor. A dual-objective strategy is developed for parameter optimization, incorporating the impedance transformation trajectory inside the predefined optimal impedance domain (OID) that satisfies the required specifications, with approximation to selected optimal load impedances. By introducing a custom adjustment factor β into the error function, coupled with an automated iterative tuning process based on S-parameter simulations, desired broadband matching results can be rapidly achieved. The proposed two-stage PA occupies a small chip area of only 1.23 mm2 and demonstrates good frequency consistency over the 24–31 GHz band. Continuous-wave characterization shows a flat small-signal gain of 19.7 ± 0.5 dB; both the output power (Pout) and the power-added efficiency (PAE) at the 4 dB compression point remain smooth, ranging from 32.3 to 32.7 dBm and 35.5% to 37.8%, respectively. The peak PAE reaches up to nearly 40% at the center frequency.