The quantity of different plastics generated after consumption is an impact factor affecting the environment, and the lack of recycling generates solid waste. The purpose of this work is to incorporate high-density recycled polyethylene fibers (HDPE) for possible use as concrete reinforcement. Physical and mechanical properties from recycled fibers were analyzed, such as density, absorption, and stress resistance, as well as workability, air content, porosity, concrete compression, and flexural strength properties. Samples were prepared with a low fiber content of 0.2% and 0.4%, as a substitution for sand weight, and lengths of 10 and 30 mm. To study corrosion phenomena, the specimens were exposed to a saline environment containing 3% sodium chloride for 365 days, and the electrochemical techniques including half-cell potential (HCP), electrochemical noise (EN), linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) were applied. The results showed a 4.8% increase in compressive strength with a low fiber percentage and short geometries, while flexural strength increased marginally by 2.3% with small quantities of HDPE fibers. All these factors contribute to greater material durability, less permeability, and crack control. A positive effect of fibers with short dimensions on the corrosion processes of a steel bar was observed, with the fibers acting as a physical barrier against the diffusion of chloride ions.
In this work, plasma nitriding was carried out to improve the corrosion resistance of API 5L X70 steel. The process was conducted at different treatment times, 4, 6, 8, and 10 h, to determine which one provides greater resistance to corrosion. The conditions under which the nitriding was carried out were as follows: a mixture of 20% N2 and 80% H2 at 3 torr pressure, a current of 2.6 × 10−6 A, a voltage of 360 V, and the temperature inside the plasma chamber was 550 °C. The blank and nitrided materials were characterized using dispersive energy spectroscopy and scanning microscopy to study their morphology and chemical composition. In addition, open potential circuit, electrochemical impedance spectroscopy, and potentiodynamic polarization curves in simulated soil solution were performed to evaluate the materials’ corrosion resistance. The treatment achieved at 10 h presented the greatest corrosion resistance, reducing the corrosion current density up to three orders of magnitude. The thickness reached 678.75 µm for this condition.
The corrosion of carbon steel in marine–industrial atmospheric environments remains a significant challenge due to the combined effect of aggressive ions such as chlorides and sulfates. In this context, this study aims to explore the inhibitory action of expired omeprazole applied to mild steel AISI 1018 evaluated on a solution simulating atmospheric corrosion (0.1 M Na2SO4 + 3% wt NaCl) over 72 h. The material was characterized using EDS to determine its composition of AISI 1018 steel, while Raman spectroscopy was employed to identify the functional groups and heteroatoms present on the molecular structure of omeprazole. Electrochemical noise (EN) measurements were used to evaluate the corrosion rate, type of corrosion and mechanism. Also, quantum chemical calculations of density function theory (DFT) were performed to predict the relationship between molecular structure and inhibition efficiency. The results indicate that 50 ppm provides the most stable and effective corrosion inhibition over time, as evidenced by increases in noise resistance and inhibition efficiency. In contrast, 75 ppm exhibits improved surface morphology at the end of the exposure period, which indicates enhanced surface coverage. The DFT results reveal that omeprazole possesses suitable electronic properties for corrosion inhibition, including moderate reactivity, electron-donating ability, and favorable charge distribution that promotes adsorption onto the metal surface. SEM analysis corroborates that surface damage is significantly reduced in the presence of the inhibitor, particularly at 75 ppm. This study provides new insights into the use of expired pharmaceutical compounds as corrosion inhibitors and demonstrates the capability of combining electrochemical noise analysis with DFT to evaluate both inhibition efficiency and film stability.
For some years, there has been interest in exploring the efficacy of corrosion inhibitors that are more environmentally friendly. The objective of this research is to evaluate the inhibitory potential of mango peel ethanol extract on the corrosion of carbon steel. The maceration method was used to obtain the inhibitor extract, and the concentrations used were 20, 50, and 100 ppm in a 3% NaCl saline solution that simulates a highly aggressive environment. Characterization of the chemical compounds was performed by FT‐IR and UV‐visible spectra. Electrochemical tests of electrochemical noise (EN), potentiodynamic curves, and electrochemical impedance spectroscopy (EIS) were performed. The results showed that the optimum concentration obtained for the corrosion inhibitors is 50 ppm, producing an efficiency of 63.11% in the polarization curves. The adsorption of the chemical compounds present in the mango peel extract on the surface of the steel obeys the Langmuir adsorption isotherm.