In this article, a deep-drawing process using a double-action hydraulic press is examined for its ability to machine the shaping deformation of a fuel-filter cup made from SPCC steel. Many researchers have studied the geometric, physical, and technological parameters of the deep-drawing process. However, most of those studies ignored the optimization parameters of the two shaping deformation states to ensure uniformity of thickness and the disappearance of wrinkling and tearing during machining. In this study, geometric and technological parameters (e.g. blank-holder force, die-shoulder radius, and radial clearance between punch and die) are optimized in both states. The deep-drawing process for a fuel-filter cup is simulated using ABAQUS software, and optimal parameters are determined by applying the Taguchi orthogonal array computation and combining it with an analysis of variance method. The numerical results are then verified with corresponding experiments. The obtained numerical and experimental results show that the die-shoulder radius is one of the most influential parameters affecting the shaping of the cup during the deep-drawing process. Moreover, the influences of technological parameters on the formability of sheet metal are finally analyzed and selected for designing and improving deep-drawing molds.
The sealing line is one of the key influences on twin-screw rotor vacuum pump performance. The design of a rotor profile based on a sealing line for an asymmetrical rotor of a vacuum pump can be studied further to generate varied rotor profiles and improve pump performance. Therefore, this study proposes a mathematical model for a pre-defined sealing line to design and optimize varied rotor profiles of vacuum pumps. The general sealing line, pre-defined by explicit equations of straight lines and elliptic curves, is proposed to generate various rotor profiles with different numbers of lobes. The functions for parameter variables of the pre-defined sealing line are constructed and directly variated along the rotor length to form the screw rotor with a variable pitch and a variable cross-section. The proposed pre-defined sealing line is also applied in the optimal design of a rotor profile to enhance pump performance. Numerical examples are performed to verify the flexibility and practicability of the proposed method.
21 December 2021 in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
The dynamic vibration absorber and tuned mass damper are widely used to suppress harmful vibration of the damped structures under external excitation. The multiple dynamic vibration absorbers have more benefit than the single dynamic vibration absorber. The multiple dynamic vibration absorbers are portability and easy to install because its size is significantly reduced compared to an individual damper. This paper proposes a design method to obtain optimal parameters of multiple dynamic vibration absorbers attached on damped primary structures by using the least squares estimation of equivalent linearization method. An explicit expression of damping ratio and tuning parameters of multiple dynamic vibration absorbers are determined for minimizing the maximum displacement of the primary structures based on the fixed-point theory. The new contribution is provided a reliable theoretical basis for optimizing parameters of the multiple dynamic vibration absorbers that are attached on the damped primary structures. The numerical results reveal the effectiveness of the proposed optimal parameters of multiple dynamic vibration absorbers in reduce vibration of damped primary structures. In the practical applications, this research results allow to divide a large dynamic vibration absorber into many equivalent small dynamic vibration absorbers, which are convenient for manufacturing and installing on the damped primary structures such as high buildings and cable-stayed bridges.