The method of simultaneous localization and mapping (SLAM) using a light detection and ranging (LiDAR) sensor is commonly adopted for robot navigation. However, consumer robots are price sensitive and often have to use low-cost sensors. Due to the poor performance of a low-cost LiDAR, error accumulates rapidly while SLAM, and it may cause a huge error for building a larger map. To cope with this problem, this paper proposes a new graph optimization-based SLAM framework through the combination of low-cost LiDAR sensor and vision sensor. In the SLAM framework, a new cost-function considering both scan and image data is proposed, and the Bag of Words (BoW) model with visual features is applied for loop close detection. A 2.5D map presenting both obstacles and vision features is also proposed, as well as a fast relocation method with the map. Experiments were taken on a service robot equipped with a 360° low-cost LiDAR and a front-view RGB-D camera in the real indoor scene. The results show that the proposed method has better performance than using LiDAR or camera only, while the relocation speed with our 2.5D map is much faster than with traditional grid map.

Simultaneous Localization and Mapping (SLAM) is an active area of robot research. SLAM with a laser range finder (LRF) is effective for localization and navigation. However, commercial robots usually have to use low-cost LRF sensors, which result in lower resolution and higher noise. Traditional scan-matching algorithms may often fail while the robot is running too quickly in complex environments. In order to enhance the stability of matching in the case of large pose differences, this paper proposes a new method of scan-matching mainly based on Fast Fourier Transform (FFT) as well as its application with a low-cost LRF sensor. In our method, we change the scan data within a range of distances from the laser to various images. FFT is applied to the images to determine the rotation angle and translation parameters. Meanwhile, a new kind of feature based on missing data is proposed to determine the rough estimation of the rotation angle under some representative scenes, such as corridors. Finally, Iterative Closest Point (ICP) is applied to determine the best match. Experimental results show that the proposed method can improve the scan-matching and SLAM performance for low-cost LRFs in complex environments.

Recently, person-following robots have been increasingly used in many real-world applications, and they require robust and accurate person identification for tracking. Recent works proposed to use re-identification metrics for identification of the target person; however, these metrics suffer due to poor generalization, and due to impostors in nonlinear multi-modal world. This work learns a domain generic person re-identification to resolve real-world challenges and to identify the target person undergoing appearance changes when moving across different indoor and outdoor environments or domains. Our generic metric takes advantage of novel attention mechanism to learn deep cross-representations to address pose, viewpoint, and illumination variations, as well as jointly tackling impostors and style variations the target person randomly undergoes in various indoor and outdoor domains; thus, our generic metric attains higher recognition accuracy of target person identification in complex multi-modal open-set world, and attains 80.73% and 64.44% $Rank$-1 identification in multi-modal close-set PRID and VIPeR domains, respectively.

The depth estimation of the 3D deformable object has become increasingly crucial to various intelligent applications. In this paper, we propose a feature-based approach for accurate depth estimation of a deformable 3D object with a single camera, which reduces the problem of depth estimation to a pose estimation problem. The proposed method needs to reconstruct the target object at the very beginning. With the 3D reconstruction as an a priori model, only one monocular image is required afterwards to estimate the target object’s depth accurately, regardless of pose changes or deformability of the object. Experiments are taken on an NAO robot and a human to evaluate the depth estimation accuracy by the proposed method.