An innovative remote sensing approach that combines land-use change and water quality information is proposed in order to investigate if Artisanal and Small-scale Gold Mining (ASGM) area extension is associated with water siltation in the Tapajós River Basin (Brazil), containing the largest small-scale gold mining district in the world. Taking advantage of a 40-year period of the multi-satellite imagery archive, the objective of this paper is to build a normalized time-series in order to evaluate the influence of temporal mining expansion on the water siltation data (TSS, Total Suspended Solids concentration) derived from previous research. The methodological approach was set to deliver a full characterization of the ASGM expansion from its initial stages in the early 1970s to the present. First, based on IRS/LISSIII images acquired in 2012, the historical Landsat image database (1973–2001) was corrected for radiometric and atmospheric effects using dark vegetation as reference to create a normalized time-series. Next, a complete update of the mining areas distribution in 2012 derived from the TerraClass Project (an official land-use classification for the Brazilian Amazon) was conducted having IRS/LISSIII as the base map with the support of auxiliary data and vector editing. Once the ASGM in 2012 was quantified (261.7 km²) and validated with photos, a reverse classification of ASGM in 2001 (171.7 km²), 1993 (166.3 km²), 1984 (47.5 km²), and 1973 (15.4 km²) with the use of Landsat archives was applied. This procedure relies on the assumption that ASGM changes in the land cover are severe and remain detectable from satellite sensors for decades. The mining expansion area over time was then combined with the (TSS) data retrieved from the same atmospherically corrected satellite imagery based on the literature. In terms of gold mining expansion and water siltation effects, four main periods of ASGM activities were identified in the study area: (i) 1958–1977, first occurrence of mining activities and low water impacts; (ii) 1978–1993, introduction of low-budget mechanization associated with very high gold prices resulting in large mining area expansion and high water siltation levels; (iii) 1994–2003, general recession of ASGM activities and exhaustion of easy-access gold deposits, resulting in decreased TSS; (iv) 2004 to present, intensification of ASGM encouraged by high gold prices, resulting in an increase of TSS.

A major limitation for remote sensing analyses of oceanographic variables is loss of spatial data. The Data INterpolating Empirical Orthogonal Functions (DINEOF) method has demonstrated effectiveness for filling spatial gaps in remote sensing datasets, making them more easily implemented in further applications. However, the spatial and temporal coverage of the input image dataset can heavily impact the outcomes of using this method and, thus, further metrics derived from these datasets, such as phytoplankton bloom phenology. In this study, we used a three-year time series of MODIS-Aqua chlorophyll-a to evaluate the DINEOF reconstruction output accuracy corresponding to variation in the form of the input data used (i.e., daily or week composite scenes) and time series length (annual or three consecutive years) for a dynamic region, the Salish Sea, Canada. The accuracy of the output data was assessed considering the original chla pixels. Daily input time series produced higher accuracy reconstructing chla (95.08–97.08% explained variance, RMSE_xval 1.49–1.65 mg m⁻³) than did all week composite counterparts (68.99–76.88% explained variance, RMSE_xval 1.87–2.07 mg m⁻³), with longer time series producing better relationships to original chla pixel concentrations. Daily images were assessed relative to extracted in situ chla measurements, with original satellite chla achieving a better relationship to in situ matchups than DINEOF gap-filled chla, and with annual DINEOF-processed data performing better than the multiyear. These results contribute to the ongoing body of work encouraging production of ocean color datasets with consistent processing for global purposes such as climate change studies.

Land cover changes (LCC) affect the water balance (WB), changing surface runoff (SurfQ), evapotranspiration (ET), groundwater (GW) regimes, and streamflow (Q). The Tapajós Basin (southeastern Amazon) has experienced LCC over the last 40 years, with increasing LCC rates projected for the near future. Several studies have addressed the effects of climate changes on the region’s hydrology, but few have explored the effects of LCC on its hydrological regime. In this study, the Soil and Water Assessment Tool (SWAT) was applied to model the LCC effects on the hydrology of the Upper Crepori River Basin (medium Tapajós Basin), using historical and projected LCC based on conservation policies (GOV_2050) and on the “Business as Usual” trend (BAU_2050). LCC that occurred from 1973 to 2012, increased Q by 2.5%, without noticeably altering the average annual WB. The future GOV_2050 and BAU_2050 scenarios increased SurfQ by 238.87% and 300.90%, and Q by 2.53% and 2.97%, respectively, and reduced GW by 4.00% and 5.21%, and ET by 2.07% and 2.43%, respectively. Results suggest that the increase in deforestation will intensify floods and low-flow events, and that the conservation policies considered in the GOV_2050 scenario may still compromise the region’s hydrology at a comparable level to that of the BAU_2050.

A field intercomparison was conducted at the Acqua Alta Oceanographic Tower (AAOT) in the northern Adriatic Sea, from 9 to 19 July 2018 to assess differences in the accuracy of in- and above-water radiometer measurements used for the validation of ocean colour products. Ten measurement systems were compared. Prior to the intercomparison, the absolute radiometric calibration of all sensors was carried out using the same standards and methods at the same reference laboratory. Measurements were performed under clear sky conditions, relatively low sun zenith angles, moderately low sea state and on the same deployment platform and frame (except in-water systems). The weighted average of five above-water measurements was used as baseline reference for comparisons. For downwelling irradiance ( $E_d$ ), there was generally good agreement between sensors with differences of <6% for most of the sensors over the spectral range 400 nm–665 nm. One sensor exhibited a systematic bias, of up to 11%, due to poor cosine response. For sky radiance ( $L_{sky}$ ) the spectrally averaged difference between optical systems was <2.5% with a root mean square error (RMS) <0.01 mWm⁻² nm⁻¹ sr⁻¹. For total above-water upwelling radiance ( $L_t$ ), the difference was <3.5% with an RMS <0.009 mWm⁻² nm⁻¹ sr⁻¹. For remote-sensing reflectance ( $R_{rs}$ ), the differences between above-water TriOS RAMSES were <3.5% and <2.5% at 443 and 560 nm, respectively, and were <7.5% for some systems at 665 nm. Seabird-Hyperspectral Surface Acquisition System (HyperSAS) sensors were on average within 3.5% at 443 nm, 1% at 560 nm, and 3% at 665 nm. The differences between the weighted mean of the above-water and in-water systems was <15.8% across visible bands. A sensitivity analysis showed that $E_d$ accounted for the largest fraction of the variance in $R_{rs}$ , which suggests that minimizing the errors arising from this measurement is the most important variable in reducing the inter-group differences in $R_{rs}$ . The differences may also be due, in part, to using five of the above-water systems as a reference. To avoid this, in situ normalized water-leaving radiance ( $L_{wn}$ ) was therefore compared to AERONET-OC SeaPRiSM $L_{wn}$ as an alternative reference measurement. For the TriOS-RAMSES and Seabird-HyperSAS sensors the differences were similar across the visible spectra with 4.7% and 4.9%, respectively. The difference between SeaPRiSM $L_{wn}$ and two in-water systems at blue, green and red bands was 11.8%. This was partly due to temporal and spatial differences in sampling between the in-water and above-water systems and possibly due to uncertainties in instrument self-shading for one of the in-water measurements.

There is an increasing need for satellite-derived accurate chlorophyll-a concentration (chla) products to improve fisheries management in coastal regions. However, the methods used to derive these products have to be evaluated, so the associated uncertainties are known. The performance of three atmospheric correction methods, the near infrared (NIR), the shortwave infrared (SWIR), and the Management Unit of the North Seas Mathematical Models with an additional modification (MUMM + SWIR), and derived chla products based on the Moderate Resolution Imaging Spectroradiometer AQUA (MODIS) images acquired from 2002 to 2014 over the west coast of Canada and the United States were evaluated. The atmospherically corrected products and above-water reflectance were compared with in situ AERONET (N ~ 650) and above-water reflectance (N ~ 34) data, and the Ocean Color 3 MODIS (OC3M)-derived chla were compared with in situ chla measurements (N ~ 82). The statistical analysis indicated that the MUMM + SWIR method was the most appropriate for this region, with relatively good retrievals of the atmospheric products, improved retrieval of remote sensing reflectance with bias lower than 20% for the OC3M bands, and improved retrievals of chla (r = 0.83, slope = 0.89, _logRMSE = 0.33 mg m⁻³ for ±1 h). The poorest chla retrievals were achieved with the SWIR and NIR methods. These results represent the most comprehensive satellite data analysis of MODIS retrievals for this region and provide a framework for the MUMM + SWIR method that can be further tested in other coastal regions of the world.