In light of the imprecise and fuzzy nature of real production environments, the order acceptance and scheduling (OAS) problem is associated with fuzzy processing times, fuzzy sequence dependent set up time and fuzzy due dates. In this study, a genetic algorithm (GA) which uses fuzzy ranking methods is proposed to solve the fuzzy OAS problem. The proposed algorithm is illustrated and analyzed using examples with different order sizes. As illustrative numerical examples, fuzzy OAS problems with 10, 15, 20, 25, 30 and 100 orders are considered. The feasibility and effectiveness of the proposed method are demonstrated. Due to the NP-hard nature of the problem, the developed GA has great importance to obtain a solution even for big scale fuzzy OAS problem. Also, the proposed GA can be utilized easily by all practitioners via the developed user interface.
This study investigates the applicability of finite mixture models (FMMs) for accurately modeling yarn quality parameters in 28/1 Ne ring-spun polyester/viscose yarns, focusing on both yarn imperfections and mechanical properties. The research addresses the need for advanced statistical modeling techniques to better capture the inherent heterogeneity in textile production data. To this end, the Poisson mixture model is employed to represent count-based defects, such as thin places, thick places, and neps, while the gamma mixture model is used to model continuous variables, such as tenacity and elongation. Model parameters are estimated using the expectation–maximization (EM) algorithm, and model selection is guided by the Akaike and Bayesian information criteria (AIC and BIC). The results reveal that thin places are optimally modeled using a two-component Poisson mixture distribution, whereas thick places and neps require three components to reflect their variability. Similarly, a two-component gamma mixture distribution best describes the distributions of tenacity and elongation. These findings highlight the robustness of FMMs in capturing complex distributional patterns in yarn data, demonstrating their potential in enhancing quality assessment and control processes in the textile industry.
2 July 2025 in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
The adoption of Unmanned Aerial Vehicles (UAVs) for agricultural spraying offers significant advantages in efficiency, precision, and sustainability. However, various factors influence their widespread adoption of this technology. This study aims to identify and prioritize the critical factors influencing the adoption of agricultural spraying UAVs in Adana using the Analytic Hierarchy Process (AHP), a robust Multi-Criteria Decision-Making (MCDM) technique. The research draws on data collected through detailed surveys with farmers in Adana, capturing their perceptions and challenges regarding UAV adoption. The findings reveal that social factors, including lack of awareness, perceived ease of use, and perceived usefulness, are the most critical factors affecting adoption, followed by operational factors such as labor scarcity and lack of technical assistance. Economic barriers and farm-related characteristics, though significant, rank lower in priority. Among the sub-factors, "lack of awareness" and "labor scarcity" emerge as the most influential. The findings emphasize the need for targeted interventions, including awareness campaigns, hands-on training, and enhanced technical infrastructure, to address these factors.
26 January 2026 in Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi
This study examines the effectiveness of unmanned aerial vehicles (UAVs) for orchard spraying, specifically in a citrus orchard where a UAV with a 40-liter tank was used. The mandarin variety was selected due to its relatively smaller canopy structure, which is hypothesized to facilitate droplet penetration from aerial spraying into the inner and lower foliage. Droplet deposition was assessed using water-sensitive papers strategically positioned on both the upper and lower sides of the tree canopy. To evaluate spray distribution uniformity, droplet deposition on the upper and lower leaf surfaces was comparatively analyzed. Spray coverage was quantified using DepositScan software, while the experimental data were statistically evaluated by ANOVA in Design-Expert 6.0 based on a randomized general factorial design. The experimental design included flight speed, droplet size, application rate, and location of water-sensitive papers as the main operational parameters. The results indicate that the proposed experimental framework successfully captured the effects of these parameters on spray penetration and deposition homogeneity in a citrus tree model.
This study investigates the applicability of finite mixture models (FMMs) for accurately modeling yarn structural quality parameters in 28/1 Ne ring-spun polyester/viscose yarns, focusing on yarn hairiness and twist. The research addresses the need for advanced statistical modeling techniques to better capture the inherent heterogeneity in textile production data. To this end, the Poisson mixture model is employed to represent the twist parameter, while the gamma mixture model is used to model the continuous hairiness indices (S3 CV% and H). Model parameters are estimated using the expectation–maximization (EM) algorithm, and model selection is guided by the Akaike and Bayesian information criteria (AIC and BIC). The results reveal that a two-component mixture distribution provides the optimal fit varies by parameter: twist is best represented by a two-component generalized Poisson mixture, which preserves the integer support of the measurements while relaxing the equidispersion restriction of the ordinary Poisson distribution, whereas hairiness (S3 CV%, H) is best described by two- and three-component gamma mixture distributions, respectively. Model adequacy is assessed by a parametric bootstrap with re-estimation on each replicate. The two-component gamma mixture for S3 CV% is not rejected, whereas residual departures remain for H and, more substantially, for twist, where the concentration of the variable on six recorded levels limits the adequacy of any continuous or semi-continuous specification. These findings highlight the robustness of FMMs in capturing complex distributional patterns in yarn data, extending previous work on yarn imperfections and mechanical properties, and demonstrating their potential in enhancing quality assessment and process control in the textile industry.
8 October 2026 in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
Bu çalışma, Türkiye’nin 2030 Sürdürülebilir Kalkınma Amaçları doğrultusunda ekonomik ve çevresel sürdürülebilirlik planlamalarına katkı sağlamak amacıyla, 27.10 GTİP kodlu petrol ürünleri ithalat miktarını 2030 yılına kadar tahmin etmeyi ve farklı tahmin modellerinin performanslarını karşılaştırmayı amaçlamaktadır. 2007–2026 dönemine ait aylık ithalat verileri kullanılarak Mevsimsel Otoregresif Entegre Hareketli Ortalama (SARIMA), Diferansiyel Evrim algoritmasıyla optimize edilmiş Holt-Winters (DE-HW) ve derin öğrenme tabanlı Hibrit Rastgele Orman–Kısa Uzun Vadeli Bellek (RF-LSTM) modelleri uygulanmıştır. Model performansları Kök Ortalama Kare Hata (RMSE), Ortalama Kare Hata (MSE), Ortalama Mutlak Hata (MAD) ve Ortalama Mutlak Yüzde Hata (MAPE) ölçütleriyle değerlendirilmiştir. Bulgular, Hibrit RF-LSTM modelinin eğitim ve doğrulama setlerinde sırasıyla %7 ve %5 MAPE değerleriyle en yüksek tahmin performansını sağladığını göstermiştir. Elde edilen 2030 tahminleri, enerji ithalatı bütçe yönetimi, lojistik planlama ve stratejik rezerv kapasitesinin belirlenmesine yönelik politika kararları için veri temelli bir çerçeve sunmaktadır.