Promising lightweight composite materials, bridging the gap between Polymer and Ceramic Matrix Composites, are manufactured as polymer derived ceramics by the use of polysiloxanes and basalt fibers. Such competitive free formable Hybrid Composites are supposed to be capable for lightweight applications in a temperature range between 300 °C and 850 °C and short time exposure up to over 1000 °C, even in oxidative atmosphere. Cheap raw materials like basalt fibers and siloxane resins in combination with performing manufacturing technologies can establish completely new markets for intermediate temperature composites. These attributes enable the Hybrid Composites as ideal material for fire retardant applications in automotive engineering and public transportation, as well as in fire protection systems in electrical and civil engineering applications. In this study, the most prominent fields of application and engineering solutions for Hybrid-CMC are reviewed and the results of the thermal resistivity analysis effectuated on basalt fiber reinforced SiOC samples are presented. This study consisted of several air exposures between 1 h and 50 h and temperatures in the range of 650 °C to 1100 °C. Remaining mechanical resistance was characterized by Impulse Excitation Technique (IET) and Interlaminar Shear Strength (ILSS) tests. Basalt fiber reinforced samples exhibited a decent level of mechanical performance even after the most demanding exposures. Due to the poor oxidation resistance of carbon fibers, Cf/SiOC composites were completely degraded after long-term exposure at 500 °C in air.
Carbon fibers are outstanding reinforcements for ceramic components due to their excellent creep and long-term thermochemical and thermomechanical stability. Nevertheless, these properties are dramatically downgraded if the unprotected fibers are exposed to an oxidative or corrosive environment. Thin ceramic coatings can improve the corrosion resistance and tailor the fiber/matrix interface in order to achieve optimized stress transfer and damage tolerance. The continuous liquid phase coating (CLPC) technique with subsequent pyrolysis is a promising alternative to chemical vapor deposition (CVD) processes. The possibility to deposit homogenous thin flaw-free coating layers on every filament of high tenacity carbon fiber bundles has been successfully proven in previous studies. In this work, high modulus carbon fibers were coated with different polysiloxane-based resins, and the obtained rovings were implemented in SiOC matrices by the precursor impregnation and pyrolysis (PIP) route. Thermogravimetric analysis shows an increased oxidation resistance of the coated fibers compared with reference samples. Enhanced fiber/matrix interface strength further improved the mechanical performance of the fabricated composites.
In the field of metal matrix composites (MMC), spark plasma sintering (SPS) technique has been used so far for the manufacture of particle, whisker and short-fiber reinforced alloys. In this work, SPS technique is employed for the first time to produce continuous fiber reinforced light metals. For this purpose, metal matrix composite prepregs with aluminum as a surface coating on carbon fiber textiles are manufactured by twin arc wire spraying and subsequently consolidated by SPS in the semi-solid temperature range of the alloy. Shear thinning rheological behavior of the metal alloy at temperatures between solidus and liquidus enables the infiltration of fiber rovings under reduced forming loads. SPS offered a better controlled and more efficient heat transfer in the green body and faster consolidation cycles in comparison with alternative densification methods. Fully densified samples with no porosity proved the suitability of SPS for densification of MMC with a remarkable stiffness increase in comparison with samples densified by thixoforging, an alternative consolidation method. However, the pulse activated sintering process leads to a quite strong fiber/matrix adhesion with evidence of aluminum carbide formation.