Mid-infrared (mid-IR) electrochromism is a promising technology that enables new ways to control radiative heat, which is particularly crucial for applications such as building thermoregulation efficiency, industrial process efficiency, spacecraft thermal engineering, and personal heat management. However, most mid-IR electrochromic devices are fabricated on planar substrates with fixed surface topography. When these planar devices are applied to three-dimensional and arbitrarily curved objects, they cannot fully conform to the objects’ surfaces, leaving an air gap and, thus, substantial thermal contact resistance that significantly compromises the efficacy of radiative thermoregulation. To address this long-standing issue, in this study, we developed a fabrication methodology that enables all-solution-processed electrochromic devices on the surface of arbitrarily curved 3D objects, effectively transforming the object surface into an electrically variable emittance layer. The key components are poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as the active layer and charge storage layer, separated by the heterogeneous mixed ionic-electronic conductor consisting of HNO3-doped carbon nanotubes (CNTs) and crosslinked polyacrylamide (PAM)/lithium chloride (LiCl), all of which conform to the object surface layer-by-layer. The mid-IR electrochromic device exhibits an apparent temperature difference of 6.1 ℃ by adjusting emissivity on the planar substrate and 1.8 ℃ on the curved substrates. Our work demonstrates a promising approach and platform to achieve outward-facing flexible electrochromic cells with broad scientific and technological impacts on light and heat management.
Conducting polymers (CPs) have been a versatile and effective material for dynamically controlling optical properties with applications ranging from electrochromic windows and displays to variable infrared (IR) emittance devices and terahertz modulators. In particular, its biocompatibility, flexibility, reversibility, solution-processability, and non-volatile switching make it suitable for radiative thermoregulation under various application scenarios. However, the current CPs for variable thermal emittance devices largely have low conductivity and are limited to thin film configuration, resulting suboptimal emissivity tunability. Here, we numerically and experimentally demonstrate CPs with extraordinary optical conductivity and properly designed metasurface structure can outperform the conventional counterparts. The IR emissivity tunability is achieved by synthesizing solution-processable polyaniline doped with camphor sulfonic acid (PANI-CSA) and characterizing the complex refractive indices at its conducting and insulating state. A forward-designed broadband wide-angle metasurface emitter based on asymmetric Fabry-Pérot cavity and gap surface plasmon resonance effectively utilizes the lossy dielectric properties at its insulating state for the high-emissivity mode. When switched to the conducting state, the metasurface becomes highly metallic and reflective, resulting in the low-emissivity mode. This study marks a new approach as we perform the co-design of macromolecular and photonic structure to enable solution-processable active metasurfaces.