Can Peng

Can Peng

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 November 2023 in Superconductor Science and Technology
Verified
Journal Article
Closed access
CPCan Peng
Can Peng
XWXuanbo Wang
Xuanbo Wang
XZXucheng Zhou
Xucheng Zhou
WLWuyang Lei
Wuyang Lei
XLXiaoning Liu
Xiaoning Liu
Zigang DengZigang Deng
Zigang Deng
High temperature superconducting (HTS) Maglev is a promising technology owing to its excellent electromagnetic properties of non-control stability and frictionless. As a critical component of HTS Maglev, the turnout poses challenges due to the use of the permanent magnet guideways (PMGs) that are difficult to switch mechanically. With simple structure and rapid responsiveness, electromagnetic turnout has become an interesting research field of HTS Maglev. The electromagnetic turnout is designed to control the electromagnetic force of the HTS bulks by adjusting the magnetic field using an electromagnetic-permanent magnetic structure. However, the magnetic field generated by the combination of the electromagnet and the PMs inevitably differs from the magnetic field above the PMGs, affecting the electromagnetic force behavior of the HTS bulks. To guarantee optimal performance of the electromagnetic turnout, the variation process of the magnetic field peak above the turnout is analyzed. Furthermore, a three-dimensional superconducting model based on the H -formulation and motion equation is built to obtain the electromagnetic force of the HTS bulks passing the turnout. It’s concluded that higher cooling heights in the preparation and higher working heights in the turnout area are recommended to reduce the magnetic resistance and avoid the destabilizing effect. In addition, the smaller bulks experience greater resistance, and the longer bulks are prone to nodding, while the wider bulks are prone to shaking above the turnout. Properly matching HTS bulks with operating conditions improves electromagnetic force behavior and benefits HTS Maglev turnout passability.

1 October 2025 in Superconductor Science and Technology
Verified
Journal Article
Closed access
WLWuyang Lei
Wuyang Lei
YFYicheng Feng
Yicheng Feng
WLWenjian Luo
Wenjian Luo
PYPeiyu Yin
Peiyu Yin
CPCan Peng
Can Peng
Zigang DengZigang Deng
Zigang Deng
High-temperature superconducting (HTS) maglev technology has currently been applied in fields such as flywheel energy storage and magnetic levitation. However, the specific mechanisms by which fractures in YBaCuO HTS bulks affect levitation performance remain unclear. To address this issue, experiments on the levitation force and trapped field of damaged HTS bulks have been conducted to investigate the effects of fractures. Furthermore, by applying appropriate magnetic field boundary constraints, the fracture, exfoliation, and crack of HTS bulks simulation method are developed. Both experimental and simulation results indicate that fractures along the a–c plane have a relatively minor impact on levitation force, with decay generally within 15%. For corner exfoliation, the maximum reduction in levitation force is around 5–8%. The influence of a–b plane crack, a–b plane fracture, and a–b plane exfoliation is fundamentally consistent, and the maximum reduction in levitation force remains below 13%, when the fracture height exceeds 6 mm and the depth ranges from 0 to 32 mm. This research can assess the visible surface crack to determine the usability of large-scale HTS bulk after damage, aiming to provide theoretical insights for the reliability of HTS bulks in practical applications.

27 February 2025 in Superconductor Science and Technology
Verified
Journal Article
Closed access
CPCan Peng
Can Peng
BHBin He
Bin He
BYBo Yang
Bo Yang
PYPeiyu Yin
Peiyu Yin
WLWuyang Lei
Wuyang Lei
Zigang DengZigang Deng
Zigang Deng
High-temperature superconducting (HTS) maglev technology has gained significant attention for its self-stabilizing levitation and guidance properties. However, the development of electromagnetic turnouts for HTS maglev systems remains underexplored, limiting their application in complex rail networks. This study processed an electromagnetic turnout with trapezoidal switch pole based on the evaluation that incorporates magnetic field and gradients. The levitation force characteristics of HTS maglev during multiple turnout crossings are analyzed with released both lateral and yaw (BLY) degrees of freedom. Furthermore, three constraint states of the levitation system are examined and found that the BLY constraint significantly reduces levitation force fluctuations and ensures smoother turnout transitions. The findings provide critical insights for designing electromagnetic turnouts and optimizing constraint conditions for HTS maglev systems, offering potential for improved performance in turnout and complex curve crossings.

10 June 2025 in Actuators
Verified
Journal Article
Open access
PDF file
TXTianyu Xing
Tianyu Xing
LGLingfeng Gao
Lingfeng Gao
PYPeiyu Yin
Peiyu Yin
CPCan Peng
Can Peng
Zigang DengZigang Deng
Zigang Deng
This paper proposes an A-shape hybrid levitation system combining high-temperature superconducting (HTS) maglev and permanent magnet levitation (PML) technologies to address the lateral instability of the PML system. By tilting the PM arrays and HTS bulks on both sides at a specific angle, the system’s cross-section forms an “A” shape. This configuration offers dual advantages: the A-shape PML significantly mitigates unstable lateral deflection forces while preserving levitation capacity, whereas the A-shape HTS maglev enhances guidance force. Through systematic analysis, the effects of the tilt angle and the magnetization direction of the PM arrays on levitation performance are investigated and optimized. The simulation results demonstrate that, at the lateral movement of 5 mm, for the PML system, a tilt angle of 45° reduces lateral deflection force by 94.4%, and synergistic optimization of the tilt angle of 40° and magnetization direction of 38° achieves an 84.6% reduction. The HTS maglev system enhances guidance force, with a 45.3% improvement at a 60° tilt angle and a 30° magnetization direction. This study presents a promising solution for developing a stable, high-load-capacity hybrid levitation system.

1 July 2025 in Superconductor Science and Technology
Verified
Journal Article
Closed access
CPCan Peng
Can Peng
BHBin He
Bin He
YFYicheng Feng
Yicheng Feng
XZXucheng Zhou
Xucheng Zhou
RZRui Zhao
Rui Zhao
Zigang DengZigang Deng
Zigang Deng
This study investigates the electromagnetic coupling dynamics characteristics of high-temperature superconducting (HTS) maglev systems under rotating magnetic fields through quasi-static and dynamic experimental characterization combined with numerical modeling. Two experimental protocols are designed: (1) quasi-static force measurements under constrained-rotation HTS bulks to quantify electromagnetic force and torque components; (2) dynamic response measurements tracking yaw angular displacement during free vibration to extract rotational damping and natural frequencies. An H -formulation model simulating translational–rotational composite fields is proposed. Finite element simulations and experimental results demonstrate that rotating magnetic fields induce significant nonlinearities in electromagnetic force, stiffness, damping and natural frequencies. Key findings reveal the dependences of the electromagnetic force on the rotation angle and the lateral displacement for the HTS maglev, including the differences in the bulk configurations. Dynamic tests show that releasing yawing rotational degree of freedom reduces natural frequency (from 3.23 Hz to 3.04 Hz) and increases rotational damping (from 0.684 N·s rad−1 to 1.602 N·s rad−1), with excessive rotational freedom destabilizing the system by displacing it from equilibrium. These results elucidate the interplay between electromagnetic-mechanical coupling stability, offering critical insights for studying HTS maglev systems under multi-excitation conditions in addressing curve and turnout trafficability challenges.

21 April 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
CPCan Peng
Can Peng
XZXucheng Zhou
Xucheng Zhou
BYBo Yang
Bo Yang
XLXiaoning Liu
Xiaoning Liu
Zigang DengZigang Deng
Zigang Deng
The flux pinning between the high-temperature superconducting (HTS) bulks and the permanent magnet guideway (PMG) ensures the stable levitation of HTS maglev. Environmental parameters impact the temperature field of the HTS maglev rail beam, while thermal-magnetic effects cause magnetic field decay and fluctuations above the PMG, leading to additional excitation on the HTS maglev vehicle. This paper develops a heat transfer model based on three months of PMG temperature measurements from an HTS maglev test line. A thermal-magnetic coupling model for the PMG is also constructed to link environmental parameters with HTS maglev levitation performance. The analysis presented here identifies 22.69% irreversible demagnetization and 5.72% reversible magnetic field fluctuations, contributing to periodic changes in levitation performance. The proposed calculation method and measurement approach provide valuable references for the state identification, operational maintenance, and safety management of maglev systems.