The visible light communication (VLC) utilising the light emitting diodes (LEDs) as transmitters has gained much interest for the indoor wireless access due to its abundance of unregulated spectrum. However, the LED non‐linearities cause a detrimental non‐linear distortion especially for the adoption of optical orthogonal frequency‐division multiplexing (O‐OFDM), which is known to suffer high peak‐to‐average power ratio (PAPR). Specifically, the authors consider the direct current biased O‐OFDM (DCO‐OFDM) to realise the O‐OFDM signals. This study aims to develop the mitigation techniques for LED non‐linearities at transmitter through the combined advantages of PAPR reduction and the technique of linearising the non‐linear LED characteristics. The orthogonal cover code sequence is exploited to design a transform precoding to reduce the PAPR. An uncomplicated pre‐distorter at transmitter is adopted to linearise the LED non‐linearity. In addition, the authors propose a dynamic DC biasing method to avoid the clipping noise in DCO‐OFDM. As a whole, the proposed techniques at VLC transmitter can improve the LED non‐linearities even for large input signals.
23 April 2018 in IEEE Transactions on Vehicular Technology
To accommodate the ever-increasing data traffic, the 5G system has adopted the enormous swathes of unlicensed spectrum at millimeter-wave band. The millimeter-wave band however exhibits orders-of-magnitude more path loss than the microwave band. The upcoming 5G system thus necessitates the use of large-scale antenna arrays to compensate for the notable path loss with beamforming gain. Nevertheless, the large number of antenna elements also poses some challenges. For example, it is impractical to assign one dedicated transceiver unit (TXRU) for each individual element and the complexity of channel estimation on spatial (antenna) domain is prohibitively high. In this paper, we design low complexity multi-user transmission on beam domain at millimeter-wave band. Specifically, we propose the beam channel set selection and user grouping schemes to significantly lower the complexity of channel estimation and precoder design by exploiting the salient feature of channel sparsity. Moreover, 2D TXRU virtualization together with beam sweeping strategies is presented as the TXRU number is less than the number of columns of planar antenna array. Simulation results show that the proposed beam-group division 5G system can significantly reduce the complexity and keep the system throughput.
In this paper, we consider the problem of multi-cell interference coordination by joint beamforming and power control. Recent efforts have explored the use of reinforcement learning (RL) methods to tackle this complex optimization problem. Typically, a decentralized multi-agent framework is adopted, wherein each base station operates as an independent RL agent. This distributed coordination has gained attention because designing a reward function that effectively captures the condition of the entire cellular network is challenging for single-agent RL models. However, the distributed approach introduces unique challenges, particularly the non-stationarity of the multi-agent environment, as agents continually adapt their policies to interact with one another. The non-stationary environment necessitates information exchange among agents, as local observations of each agent are insufficient to fully capture the true state of the environment. Unfortunately, this information exchange incurs a significant overhead, thereby limiting data transmission capabilities. To address these challenges, we propose a novel single-agent RL approach that eliminates the need for information exchange and the conventional reward function. Instead, we leverage success examples to guide the learning process. Simulation results show that the proposed approach outperforms the existing multi-agent method and theoretical algorithm in terms of sum rates. Additionally, our approach ensures a uniform quality of service while maximizing the overall sum rate.
The development of conversational voice assistant applications has been in full swing around the world. This paper aims to develop traditional Chinese multi-domain task-oriented dialogue (TOD) systems. It is typically implemented using pipeline approach, where submodules are optimized independently, resulting in inconsistencies with each other. Instead, this paper implements end-to-end multi-domain TOD models using pre-trained deep neural networks (DNNs). This allows us to integrate all the submodules into one single DNN model to solve the inconsistencies. Data shortages are common in conversational natural language processing (NLP) tasks using DNN models. In this regard, dropout regularization has been widely used to improve overfitting caused by insufficient training dataset. However, the randomness it introduces leads to non-negligible discrepancies between training and inference. On the other hand, pre-trained language models have successfully provided effective regularization for NLP tasks. An inherent disadvantage is that fine-tuning the pre-trained language model suffers from exposure bias and loss-evaluation mismatch. To this end, we propose a reinforcement learning (RL) approach to address both issues. Furthermore, we adopt a method called regularized dropout (R-Drop) to improve the inconsistency in dropout layers of DNNs. Experimental results show that both our proposed RL approach and the R-Drop technique can significantly improve the joint target accuracy (JGA) score and combined score of traditional Chinese TOD system in tasks of dialogue state tracking (DST) and end-to-end sentence prediction, respectively.
This study investigates channel estimation for amplify‐and‐forward (AF) relaying systems. For a two‐hop relaying system, channel estimation of a relay path (source–relay–destination) with AF relaying is unique because both individual source‐to‐relay (S–R) and relay‐to‐destination (R–D) links are necessary at the destination to perform the optimum combination of signals received from the direct path (source‐to‐destination) and relay path if employing a cooperative diversity transmission. Until now, most literature about channel estimation on relaying systems has focused on the composite channel of the relay path, and not its individual links. Current methods to separate the estimation of both individual links require the relay to either deliver a quantised version of the S–R link estimate through an independent feed‐forward channel, or to perform discrete Fourier transform/inverse discrete Fourier transform operations before amplifying the received signals. In this study, the respective channel estimations are done at the destination. First, the destination utilises a relay amble (R‐amble) to obtain channel estimation of the R–D link. Next, exploiting the R–D link estimate, a maximum‐likelihood estimator is proposed for the S–R link in a decision‐directed (DD) way. Simulation results show that the proposed scheme out performs the current relay‐assisted methods in most circumstances. In addition, numerical results reveal that the mean‐square error can be significantly reduced in a DD way for symbol error rates of interest.
1 January 2013 in IEICE Transactions on Communications