The increasing development of flexible and printed electronics has fueled substantial advancements in selective laser sintering, which has been attracting interest over the past decade. Laser sintering of metal nanoparticle dispersions in particular (from low viscous inks to high viscous pastes) offers significant advantages with respect to more conventional thermal sintering or curing techniques. Apart from the obvious lateral selectivity, the use of short-pulsed and high repetition rate lasers minimizes the heat affected zone and offers unparalleled control over a digital process, enabling the processing of stacked and pre-structured layers on very sensitive polymeric substrates. In this work, the authors have conducted a systematic investigation of the laser sintering of micro-patterns comprising Ag nanoparticle high viscous inks: The effect of laser pulse width within the range of 20–200 nanoseconds (ns), a regime which many commercially available, high repetition rate lasers operate in, has been thoroughly investigated experimentally in order to define the optimal processing parameters for the fabrication of highly conductive Ag patterns on polymeric substrates. The in-depth temperature profiles resulting from the effect of laser pulses of varying pulse widths have been calculated using a numerical model relying on the finite element method, which has been fed with physical parameters extracted from optical and structural characterization. Electrical characterization of the resulting sintered micro-patterns has been benchmarked against the calculated temperature profiles, so that the resistivity can be associated with the maximal temperature value. This quantitative correlation offers the possibility to predict the optimal process window in future laser sintering experiments. The reported computational and experimental findings will foster the wider adoption of laser micro-sintering technology for laboratory and industrial use.

Ag nanowire (NW) networks have exquisite optical and electrical properties which make them ideal candidate materials for flexible transparent conductive electrodes. Despite the compatibility of Ag NW networks with laser processing, few demonstrations of laser fabricated Ag NW based components currently exist. In this work, we report on a novel single step laser transferring and laser curing process of micrometer sized pixels of Ag NW networks on flexible substrates. This process relies on the selective laser heating of the Ag NWs induced by the laser pulse energy and the subsequent localized melting of the polymeric substrate. We demonstrate that a single laser pulse can induce both transfer and curing of the Ag NW network. The feasibility of the process is confirmed experimentally and validated by Finite Element Analysis simulations, which indicate that selective heating is carried out within a submicron-sized heat affected zone. The resulting structures can be utilized as fully functional flexible transparent electrodes with figures of merit even higher than 100. Low sheet resistance (90%) make the reported process highly desirable for a variety of applications, including selective heating or annealing of nanocomposite materials and laser processing of nanostructured materials on a large variety of optically transparent substrates, such as Polydimethylsiloxane (PDMS).

The flow through a forced circulation Z-type flat plate solar collector was investigated by means of combined experimental measurements and numerical simulations. The efficient operation of such collectors depends on the uniformity of the flow rate distribution among their riser tubes, while low pumping power demand is also sought. Mass flow rate measurements in the riser tubes were performed, utilizing a specially adapted ultrasound instrument for various values of total flow rates in the collector. By means of a commercial Computational Fluid Dynamics (CFD) code, laminar and turbulent flow models in different computational grids were tested and validated against the experiments. Appropriate metrics were introduced to quantify flow rate distribution non-uniformity among the risers, and pressure drop through the manifold was calculated. Parametric studies for flow conditions outside the experimental window were performed utilizing the CFD method in order to assess the effect of the Reynolds number in the flow distribution among the riser tubes. Furthermore, aiming to enhance flow rate uniformity, a methodology based on modifying the diameter of each riser tube was applied and successfully demonstrated. The proposed method can be employed in large solar collector arrays, either as stand-alone systems or as belonging to hybrid alternative sources of energy (ASE) systems, aiming to optimize their overall efficiency.