Self‐powered sensing technologies are increasingly sought for intelligent and autonomous marine environmental monitoring. A Faraday cage‐enabled triboelectric nanogenerator (FC‐TENG) is developed by incorporating a FeCoCrNiAl alloy powder layer, enabling efficient harvesting of low‐frequency mechanical energy. The quasi‐enclosed conductive architecture mimics a Faraday cage, effectively confining electrostatic charges and suppressing edge‐induced dissipation, thereby enhancing charge retention. Compared to single‐metal triboelectric layers, the FC‐TENG exhibits 4.86‐, 3.57‐, and 2.76‐fold increases in open‐circuit voltage (VOC, 1276.27 V), short‐circuit current (ISC, 63.69 μA), and transferred charge (QSC, 29.55 nC), respectively. Its hydrophobic surface further ensures environmental robustness and stable output under humid conditions. With an optimized load resistance of 60 MΩ, the FC‐TENG device achieves a peak power of ~4.08 mW and reliably powers LED arrays and environmental sensors, while enabling efficient energy storage across a wide frequency range. Furthermore, a wave‐driven FC‐TENG system integrated with wireless communication and visual feedback modules enables real‐time marine motion monitoring without external power. This work introduces the Faraday cage–inspired triboelectric device based on microspherical alloy powder, offering enhanced charge retention, humidity tolerance, and dual‐mode functionality in power generation and marine wave sensing. The proposed strategy provides a robust and scalable architecture for future self‐powered systems operating in harsh environments.
This study presents a simulation-based feasibility analysis of a beam steering metasurface, theoretically driven by mechanical energy harvested from human motion via a triboelectric nanogenerator (TENG). In the proposed model, the TENG converts biomechanical motion into alternating current (AC), which is rectified into direct current (DC) to bias varactor diodes integrated into each metasurface unit cell. These bias voltages are numerically applied to dynamically modulate the local reflection phase, enabling beam steering without external power. Full-wave electromagnetic simulations were conducted to confirm the feasibility of beam manipulation under TENG-generated voltage levels. The proposed simulation-driven design offers a promising framework for battery-free, adaptive electromagnetic control with potential applications in wearable electronics, intelligent sensing, and energy-autonomous radar systems.
In this study, we explore the integration of a cost-effective triboelectric nanogenerator (TENG) with an large silicon PIN detector (diameter: 12 mm) for intelligent wireless recognition applications. Wireless communication eliminates the need for physical connections, enabling greater flexibility and scalability in deployment. It allows for seamless integration of AI systems into a wide range of environments without the constraints of wiring, reducing installation complexity and enhancing mobility. Additionally, we demonstrate the TENG’s functionality as an autonomous communication unit. The TENG is employed to convert various environmentally triggered signals into digital formats and to autonomously power optoelectronic devices, thus eliminating the need for an external power supply. By integrating optoelectronic components within the self-powered sensing system, the TENG can identify specific trigger information and reduce extraneous noise, thereby improving the accuracy of information transmission. Moreover wireless technology facilitates real-time data transmission and processing. This setup not only enhances the overall efficiency and adaptability of the system but also supports continuous operation in diverse and dynamic settings. This paper introduces a novel convolutional neural network-long short-term memory (CNN-LSTM) fusion neural network model. Utilizing the sensing system in combination with the CNN-LSTM neural network enables the collection and identification of variations in the flicker frequency and luminosity of optoelectronic devices. This capability allows for the recognition of environmental trigger signals generated by the TENG. The classification and recognition results of human body trigger signals indicate a recognition accuracy of 92.94%.
In this study, we explore the integration of a cost-effective triboelectric nanogenerator (TENG) with an large silicon PIN detector(diameter:12mm)for intelligent wireless recognition applications. Wireless communication eliminates the need for physical connections, enabling greater flexibility and scalability in deployment. It allows for seamless integration of AI systems into a wide range of environments without the constraints of wiring, reducing installation complexity and enhancing mobility. Additionally, we demonstrate the TENG's functionality as an autonomous communication unit. The TENG is employed to convert various environmentally triggered signals into digital formats and to autonomously power optoelectronic devices, thus eliminating the need for an external power supply. By integrating optoelectronic components within the self-powered sensing system, the TENG can identify specific trigger information and reduce extraneous noise, thereby improving the accuracy of information transmission.Moreover wireless technology facilitates real-time data transmission and processing. This setup not only enhances the overall efficiency and adaptability of the system but also supports continuous operation in diverse and dynamic settings. This paper introduces a novel CNN-LSTM fusion neural network model. Utilizing the sensing system in combination with the CNN-LSTM neural network enables the collection and identification of variations in the flicker frequency and luminosity of optoelectronic devices. This capability allows for the recognition of environmental trigger signals generated by the TENG. The classification and recognition results of human body trigger signals indicate a recognition accuracy of 92.94%.