An aqueous mixture of three compounds (atrazine, carbamazepine, and p-chlorobenzoic acid) has been treated by photochemical processes including photolysis and photocatalysis with 10.7% TiO₂ supported on ceramic foams of mullite. Experiments were conducted in both ultrapure water and in a secondary effluent from a municipal wastewater treatment plant. Radiation at 365 nm was totally inefficient in the photolytic process carried out in ultrapure water; however, some sensitization phenomena were observed when municipal wastewater was used as a bulk matrix. In the latter case, conversion values in the range of 20–30% were obtained after 2 h. The photocatalytic process was much more effective experiencing conversions above 80% after just 80 min of reaction. The nature of the matrix used exerted a significant influence. Use of municipal wastewater slowed down the process due to the scavenging character of the natural organic matter content. Test runs in the presence of carbonates and t-butyl alcohol suggested that radical carbonates play some role in contaminant abatement, and secondary radicals generated after the t-BuOH attack by HO^● radicals should also be considered in the reaction mechanism. A pseudo-empirical mechanism of reactions sustains the experimental result obtained, acceptably modeling the effects of a water matrix, scavenger addition, and radiation volumetric photon flux.

Solar photocatalytic ozonation has been used to oxidize the herbicide clopyralid in aqueous solution. Activated carbon used as a catalyst was characterized by Scanning Electron Microscopy (SEM) images showed the presence of irregular cavities and pores, which have different sizes and shapes, with a great surface area of BETand a high pHpzc. The adsorption kinetics was found to follow the pseudo-second-order kinetic mode. Catalyst stability was tested by means of consecutive reuse cycles. After five cycle of reuse the adsorption efficiency reached 75% of the clopyralid removal.Clopyralid elimination kinetic by direct ozonation has been studies. The system O₃/AC/Daylight significantly improves clopyralid and mineralization rate abatement if compared to runs conducted in the absence of radiation and/ or activated carbon. Clopyralid total abatement was achieved in less than 30 min when 0.5 g/L of activated carbon and under solar radiation (300-800 nm) were used. Thus, TOC removal in 180 min treatments increased from 20 to about 90 % in O₃ and O₃/OSAC/Daylight, respectively, under similar operating conditions.