Monte Carlo (MC) technique is becoming a very effective simulation method for prediction and analysis of the grain growth kinetics at mesoscopic level. It should be noted that MC models have no real time of physical systems due to the probabilistic nature of this simulation technique. This leads to difficulties when converting simulated time, the Monte Carlo steps , to real time. The correspondence between Monte Carlo steps and real time should be proposed for comparing the kinetics of MC models with the experiments. In this work, the conversion of Monte Carlo steps to real time is attempted. The lattice sites spacing Δ and the temperature cannot be ignored in the Monte Carlo simulation of grain growth. Real time will be associated with , , and Δ.
1 January 2020 in Computer Methods in Material Science
The choice of the lattice sites to be reoriented in the Monte Carlo Potts algorithm for grain growth simulation is repeated in a non-homogeneous way. Therefore, some grains are favorably growing than others. This fact may seriously affect the simulation results. So a modified MC method is presented. Lattice sites are selected for reorientation one by one following their positions in the matrix in each Monte Carlo step (mcs). This approach ensures that the various selections of one lattice site within every mcs are eliminated, and no favorable growth of grains at the expense of others. The calculation time considerably decreases. The effect of real-time and physical temperature on the grain growth kinetics is discussed.