Mining activities generate large volumes of waste, posing environmental and economic challenges, particularly in Brazil’s Quadrilátero Ferrífero region. This study assesses the potential reuse of iron ore waste from Samarco Mineração S.A. in road pavement layers by blending it with phyllite residual soil (PRS) and lateritic clayey soil (LCS). The addition of 50% waste to PRS led to substantial improvements, increasing the resilient modulus (RM) by up to 130% under medium stress and reducing expansibility from 6.1% to 1%, meeting Brazilian standards for sub-base applications. These enhancements make the PRS-waste blend a viable and sustainable option for reinforcing subgrade and sub-base layers. In contrast, the LCS with 20% waste showed moderate RM improvements under high-stress conditions, while higher waste contents reduced stiffness, indicating that higher dosages may adversely affect performance. This study highlights the potential of inert, non-hazardous mining waste as a safe and efficient solution for pavement applications, promoting the sustainable use of discarded materials.
Mining activities generate large volumes of tailings with significant environmental impact but also the potential for sustainable reuse in construction materials. This study evaluates the production of ceramic aggregates from mixtures of clay, sand, and iron ore waste subjected to thermal treatment at temperatures ranging from 600 to 1100 °C. The influence of calcination temperature on mineralogical transformations and mechanical integrity was investigated using X-ray diffraction (XRD) and the -Treton parameter, derived from standardized impact resistance testing. The results indicate that the formation of metakaolinite between 700 and 900 °C enhances mechanical resistance, while higher temperatures (>900 °C) lead to structural degradation, followed by partial recovery due to mullite crystallization. The -Treton curve exhibited clear correlation with the phase changes identified by XRD, demonstrating its applicability as a low-cost, sensitive proxy for optimizing thermal activation. A simplified methodology is proposed to optimize the thermal activation of such materials by correlating firing temperature with mineralogical evolution and mechanical integrity, contributing to the development of sustainable ceramic aggregates for pavement applications.