In this paper, the physics-informed neural network (PINN) method is investigated and applied to nuclear reactor physics calculations with neutron diffusion models. The reactor problems were introduced with both fixed-source and eigenvalue modes. For the fixed-source problem, the loosely coupled reactor model was solved with the forward PINN approach, and then, the model was used to optimize the neural network hyperparameters. For the k-eigenvalue problem, which is unique for reactor calculations, the forward PINN approach was modified to expand the capability of solving for both the fundamental eigenvalue and the associated eigenfunction. This was achieved by using a free learnable parameter to approximate the eigenvalue and a novel regularization technique to exclude null solutions from the PINN framework. Both single-energy-group and multiple-energy-group diffusion models were examined in the work to demonstrate the PINN capabilities of solving systems of coupled partial differential equations in reactor problems. A series of numerical examples was tested to demonstrate the viability of the PINN approach. The PINN solution was compared against the finite element method solution for the neutron flux and the power iteration solution for the k-eigenvalue. The error in the predicted flux ranged from 0.63% for simple fixed-source problems up to about 15% for the two-group k-eigenvalue problem. The deviations in the predicted k-eigenvalues from the power iteration solver ranged from 0.13% to 0.92%. These generally acceptable results preliminarily justified the feasibility of PINN applications in reactor problems. The advantageous application potentials as well as the observable computational deficits of the PINN approaches are discussed along with the pilot study.
Pebble Bed Reactors (PBRs) represent a new generation of nuclear reactors. However, modeling TRi-structural ISOtropic (TRISO) fuel particles employed in PBRs presents a unique challenge in comparison to most conventional reactor designs. Rapid generation of different possible fuel particle configurations for Monte-Carlo simulations provides improved insights into the effects of particle distribution irregularities on the neutron economy. Defective pebbles could cause changes in the neutron flux in a nuclear reactor due to increased or decreased moderating effects. Different configurations of particle fuel also impact isotope production within the nuclear reactor. This study simulates several TRISO configurations representing limited capabilities of randomization algorithms, manufacturing defects configurations and/or special pebble design. All predictions are compared to an equivalent homogenized model used as baseline. The results show that the TRISO configuration has a non-negligible impact on the parameters under consideration. To explain these results, the ratio of the thermal flux of each model to the thermal flux of the homogeneous model is calculated. A clear pattern is observed in the data: as irregularities in the moderator medium emerge due to the distribution of TRISO particles, the neutron spectrum softens, leading to higher values of k∞ and better fuel utilization. This dependence of the spectrum on the TRISO configuration is used to explain the pattern observed in the depletion calculation. The results open the possibility of optimizing the TRISO configuration in manufactured pebbles for fuel utilization and safeguards. Future work should focus on full core simulations to determine the extent of these findings.
Molten Salt Reactors (MSRs) have recently gained resurged research and development interest in the advanced reactor community. Several computational tools are being developed to capture the strong neutronics/thermal-hydraulics coupling effect in this special reactor configuration. This paper presents a consistent one-dimensional (1D) multigroup neutron diffusion model for MSR analysis, with the primary aim for fast and accurate calculations for long transients, as well as sensitivity and uncertainty analysis of the reactor. A fictitious radial leakage cross section is introduced in the model to properly account for the radial leakage effects of the reactor. The leakage cross section and other consistent neutronics parameters are generated with the Monte Carlo code Serpent using high-fidelity three-dimensional (3D) models. The accuracy of the 1D consistent model is verified by the reference solution from the Monte Carlo model on the Molten Salt Reactor Experiment (MSRE) configuration. The 1D consistent model successfully reproduced the integrated flux from the 3D model and the reactor multiplication factor keff with the error in the range of 95 to 397 pcm (per cent mille), depending on discretized energy group structures. The developed model is also extended to estimate the reactivity loss due to fuel circulation in MSRE. The estimate of reactivity loss in dynamics analysis is in great agreement with the experimental data. This model functions as the first step in the development of a 1D fully neutronics/thermal-hydraulics coupled model for short- and long-term MSRE transient analysis.