This paper studies the problem of control for discrete time delay linear systems with Markovian jump parameters. The system under consideration is subjected to both time-varying norm-bounded parameter uncertainty and unknown time delay in the state, and Markovian jump parameters in all system matrices. We address the problem of robust state feedback control in which both robust stochastic stability and a prescribed H/sub /spl infin// performance are required to be achieved irrespective of the uncertainty and time delay. It is shown that the above problem can be solved if a set of coupled linear matrix inequalities has a solution.

Studies the problem of Kalman filtering for a class of uncertain linear continuous-time systems with Markovian jumping parameters. The system under consideration is subjected to time-varying norm-bounded parameter uncertainties in the state and measurement equations. Stochastic quadratic stability of the above system is analyzed. A state estimator is designed such that the covariance of the estimation error is guaranteed to be within a certain bound for all admissible uncertainties, which is in terms of solutions of two sets of coupled algebraic Riccati equations.

In this brief, the problems of the mixed H-infinity and passivity performance analysis and design are investigated for discrete time-delay neural networks with Markovian jump parameters represented by Takagi-Sugeno fuzzy model. The main purpose of this brief is to design a filter to guarantee that the augmented Markovian jump fuzzy neural networks are stable in mean-square sense and satisfy a prescribed passivity performance index by employing the Lyapunov method and the stochastic analysis technique. Applying the matrix decomposition techniques, sufficient conditions are provided for the solvability of the problems, which can be formulated in terms of linear matrix inequalities. A numerical example is also presented to illustrate the effectiveness of the proposed techniques.

In hypersonic flows about space vehicles in low earth orbits or flows in microchannels of microelectromechanical devices, the local Knudsen number lies in the continuum–transition regime. Navier–Stokes equations are not adequate to model these flows since they are based on small deviation from local thermodynamic equilibrium. To model these flows, a number of extended hydrodynamics or generalized hydrodynamics models have been proposed over the past fifty years, along with the direct simulation Monte Carlo (DSMC) approach. One of these models is the Burnett equations which are obtained from the Chapman–Enskog expansion of the Boltzmann equation [with Knudsen number (Kn) as a small parameter] to $\mathrm{O(}{\mathrm{Kn}}^{\mathrm{2}}\mathrm{).}$ With the currently available computing power, it has been possible in recent years to numerically solve the Burnett equations. However, attempts at solving the Burnett equations have uncovered many physical and numerical difficulties with the Burnett model. As a result, several improvements to the conventional Burnett equations have been proposed in recent years to address both the physical and numerical issues; two of the most well known are the “augmented Burnett equations” and the “BGK–Burnett equations.” This paper traces the history of the Burnett model and describes some of the recent developments. The relationship between the Burnett equations and the Grad’s 13 moment equations is elucidated by employing the Maxwell–Truesdell–Green iteration. Numerical solutions are provided to assess the accuracy and applicability of Burnett equations for modeling flows in the continuum–transition regime. The important issue of surface boundary conditions is addressed. Computations are compared with the available experimental data, Navier–Stokes calculations, Burnett solutions of other investigators, and DSMC solutions as much as possible.